Cycle Time Setting
(Time interval between camera selections)
The default cycle time for the receiver is preset to
4 seconds. To change the cycle time, press both of
the buttons (Auto & Manual) on front of the receiver
simultaneously. The Monitor will beep. Each beep
is one extra second of cycle time added. The cycle
time can be veriﬁ ed by the number of ﬂ ashes the
LED makes when you release the buttons—one
ﬂ ash equals one second. Cycle time can be set
between 2-30 seconds.
The 45233 Wireless Color
Camera features Night
Vision technology. Objects
and images can be seen in
little or no light up to 10 ft.
The camera uses a special
image sensor that
available light levels.
It turns on/off the Infra-Red (IR) LEDs on the front of
the camera. These LEDs provide artiﬁ cial light that
allows the camera to 'see' in the dark. Night Vision
will appear as a Black and White image. When the
image sensor detects enough light, color will return
to the images.