and Vertical Hold can be adjusted with controls at
the back of the monitor.
CHANNEL (CAMERA) SELECTION
To select one of
the four channels
manually, press the
MANUAL button on
the front panel of the
Monitor. The green
LED will light for
channel. The Monitor
will switch to a different channel (1, 2, 3, 4) each time
the MANUAL button is pressed. When you have
selected the channel with the active camera, that
video will appear on the monitor screen.
Auto Cycle Mode
To have the Monitor automatically switch between
active channels, press the AUTO button on the front
panel of the Monitor. The green LED will light and the
Monitor will automatically select between the active
cameras. The monitor will display images from both
cameras alternately. The Monitor will only search
active channels (channels with cameras connected).