Polycom CX5000 Deployment Manual page 36

Polycom CX5000 Deployment Guide
Table 22.
Component Subcomponent
System Name of exe that the
property applies.
System NULL
ADSP NULL
This section discusses usage logging. Table 23 shows the columns and values used when LoggingType
== Health and Property == Usage.
Physical Column
DeviceType
Date Time
ID
LoggingType
Device Name
Table 24 shows the columns and values used in usage logging. This type of usage logging uses the
Component, Property, Value1, Value2, Value3, Value4, and Value5 columns. The Value3 value is the
session type, which can be one of PcAudio, PcVideo, or PstnCall. When VoIP is used with Polycom
CX5000, a PcAudio usage entry is logged with the start time and end time. When video streams are
used in Polycom CX5000, a PcVideo usage entry is logged with the start time and end time. When
Polycom CX5000 is used as an analog phone, a PstnCall usage entry is logged with the start time, end
time, originating phone number (configured in the Polycom CX5000 device configuration), and the
first digit of the dialed phone number.
Table 24.
Component Property
System Usage
System Usage
System Usage
Logging Type == Image Update
32
Possible Values for Component, Subcomponent, Property, and Value1 Columns
Property
MemoryUsage
Uptime
ADSP HEALTH
Table 23. Columns Used in Usage Logging
CX5000
Value of [Date Time]
Value of [Product ID]
Health
Value of [Device Name]
Values Used in Usage Logging When Component == System
Value1 Value2
Start time End time
Start time End time
Start time End time
Value1
Usage in bytes
Up time since boot.
nI2CStatus:<#> :
nSPIErrorCounts: <#> :
nSPILastError: <#> : nI2SReadGlitchCount: <#> :
nI2SWriteGlitchCount: <#> :
Value Logged
Value3 Value4
PcAudio Null
PcVideo Null
PstnCall Phone number of
the originating
Polycom CX5000
Value 5
First digit of
dialed
number
Polycom, Inc.