Polycom CX5000 Deployment Manual page 18

Polycom CX5000 Deployment Guide
Field
Lighting frequency
Field
Audio debug logging
Video debug logging
System debug logging
Country LCD Display Settings –
Argentina Spanish
Australia English
Austria German
Belgium English
Brazil Brazilian Portuguese
Bulgaria English
Canada English
China Simplified Chinese
Costa Rica Spanish
Cyprus English
14
Daylight/sunlight – 6500 K
The lighting frequency can be set to the following
values:
Auto
50 Hz
60 Hz
The lighting frequency setting should match the AC
power frequency of the deployment location to
ensure good video quality. If it is set to Auto, the
device will attempt to detect the frequency from the
power source. Automatic detection results may vary
due to variance in the circuit at the time of
detection.
Table 14.
Enable verbose audio debug logging. On or Off.
Toggle verbose video debug logging.
On or Off.
Toggle verbose system debug logging. On or Off.
Table 15. Default Settings for Individual Countries
Time Settings –
Display Language
(see Table 1) (see Table 6)
GMT-3
GMT +10
GMT +1
GMT +1
GMT - 3
GMT + 2
GMT - 5
GMT+8
GMT-6
GMT**
Description
Debugging Settings
Description
Telephony Settings –
Time Zone Flash Timing
(see Table 8)
300 ms
100 ms
100 ms
100 ms
300 ms
100 ms
700 ms
100 ms
700 ms
100 ms
Factory default
The default lighting
frequency is determined by
the country in which the
product is sold. See Table
15 for country-specific
settings.
For deployment in Japan,
check the AC power
frequency at the location,
and ensure that Lighting
frequency is set accordingly.
Factory default
Off
Off
Off
Advanced Settings –
Lighting Frequency
(see Table 13)
50 Hz
50 Hz
50 Hz
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
Polycom, Inc.