Tables For 2/3 Thread Rolled Edge - Husqvarna Viking Huskylock 936 User Manual

Table for three thread rolled edge and narrow edge
Cutting width
Stitch length
Differential feed ratio
Thread tension
Right needle thread (2)
Upper looper thread (3)
Lower looper thread (4)
Adjust thread tension according to type of fabric and thread.
Two thread rolled edge
1. Convert to 2-thread overlock, see page 31.
2. Use right needle only and pull stitch fi nger lever toward you to align with "R" on the needle
plate.
Table for two thread rolled edge and narrow edge
Cutting width
Stitch length
Differential feed ratio
Thread tension
Right needle thread (2)
Upper looper thread (3)
Lower looper thread (4)
Rolled edge
Rolled edge
—34—
Narrow edge
Narrow edge