Choice Of Language; Auto Mode - Husqvarna Viking Huskylock 936 User Manual

2-3. Choice of language

You can select the following languages :
American English, British English, French, Italian, German, Swedish, Norwegian, Danish, Finnish,
Dutch, Spanish, Czech, Polish, and Russian.
Select the language as follows:
1. Turn on the machine while pressing the auto button
ously. The pre-set language is displayed.
2. Press the plus button
3. Press the memory button
4. The selected language is now stored and stays in memory even if you turn off the machine.

2-4. Auto Mode

The recommended settings are displayed for perfect stitching.
Note: Fabric and thread may vary. Therefore try the setting on scraps fi rst.
(1) Stitch selection
Turn on the machine, then "Auto A1" type of fabric "Woven med" (for woven medium)
and stitch "4-thread overlock" appears.
Change the stitch by pressing the stitch selection button
Each time you press the button
Compare with "2-7. Stitch table (page 15)" and continue pressing the stitch selection button
until the desired stitch is displayed.
When the display shows "—" for the thread tension, it means "Do not thread here".
Note: When it is necessary to change the accessory type, the accessory alert message is dis-
played. To cancel this message, press the auto button
Sewing (page 25)".
or minus button
.
, the recommended settings are displayed.
—11—
and cursor button
until the desired language is displayed.
.
. For accessory type, see "4.
simultane-