Husqvarna Viking Huskylock 936 User Manual page 64

Piping Foot (Option)
(Part number : 2141002-408 [Large]
2141012-408 [Small])
(Part number, for USA only :
5.5mm-141 000596
3.0mm-141 000597)
Your Huskylock has two optional piping feet.
One for standard size piping and wider grooved
foot for large decorator piping. The sewing
technique for both is the same.
1. Replace regular foot with piping foot.
2. Place piping with its welted edge opposite
to seam line between fabric with right sides
together.
3. Place your fabric under the foot, making sure
the welted part of the piping is being fi tted
into the groove engraved on the underside of
presser foot.
4. Sew the piping extending beyond fabric for a
few stitches to confi rm if the fabric with pip-
ing is properly fed. Then sew it with fabric.
5. After sewing, open fabrics.
Wrong side
—60—
Right side
Wrong side
Right side