Preparation - Husqvarna Viking Huskylock 936 User Manual

Remove
A
Cutter cover
Attach
B
Front cover
—3—

1-3. Preparation

Handwheel
Always turn handwheel toward you.
Change the presser foot
Turn the main power switch off.
(See page 4)
1. Raise presser foot.
2. Raise needle to its highest position by turning
the handwheel toward you.
3. Push button (A) and the foot will come off.
4. Position the new foot with the pin beneath
the groove of the ankle. Lower the presser
foot lever to mark the ankle snap on to the
presser foot.
Open the front cover
Push part (B) - at the arrow - to the right and
pull the cover down toward you.
Close the front cover
Close the cover with caution. The front cover
must be closed while sewing. The front cover
has a safety switch. If the front cover is not
closed, the machine will not sew.