Three Thread Overlock - Husqvarna Viking Huskylock 936 User Manual

Left needle
2
1
Right needle
2
1

4-2. Three thread overlock

To sew three thread overlock, simply remove
one needle.
1. Remove the right needle for wide three
thread
➀
Use dial for the tension of the left needle
thread, stitch width / cutting width is normally
5.5 mm. The differential feed ratio is normally
"1.0".
2. Remove the left needle for narrow three
thread
The right needle sews a narrow width. Use dial
➁
for the tension of the right needle thread,
stitch width / cutting width is normally 3.5 mm.
The differential feed ratio is normally "1.0".
—29—