Choice Of Language; Auto Mode - Husqvarna Viking Huskylock 905 User Manual

Needle position
Recommended needle position is displayed which corresponds to marking on the needle clamp.
Cutting width
The recommended cutting width is displayed.
Thread tension
The recommended thread tension is displayed. Each thread tension dial corresponds to colour
symbols from left to right.
Differential feed ratio
Standard ratio is displayed.
Fabric
Fabric type is displayed.
Mode and stitch number
Stitch
Stitch length
Stitch finger
position

2-2. Choice of language

You can select the following languages: American English, Britich English, French, Italian, German,
Swedish, Norwegian, Danish, Finnish, Dutch, Spanish, Czech, Polish, Japanese.
Select the language as follows:
1. Turn on the machine while pressing the A-key and the Cursor key
set language is displayed.
2. Press the (+) key or the (-) key until the desired language is displayed.
3. Press the M-key.
4. The selected language is now stored and stays in the memory even if you switch off the ma chine.
2-3. : Auto-Mode
The recommended settings are displayed for prefect stitching. Note: Fabric and threads may vary.
Therefore try the setting on scraps rst.
Needle position
Memory
Cutting width
–17–
—17—
Fabric
Thread tension
simultaneously. The pre-
Differential feed
ratio