Mounting; Orientation; Rigging - Chauvet Hurricane 1101 User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 8
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
This product may not be tilted. This product should only be mounted/used on a
level surface.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and fluid replenishment.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has 13-mm holes, which are appropriate
for this purpose.
·
The rubber feet also serve as floor supports and allow for surface mounting. When
mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
Mounting Clamp
(such as CLP-15 clamp
from Chauvet)
Mounting
Bracket
Safety
Loop
Nozzle
While operating the Hurricane™ 1101, make sure there is adequate fog fluid in the
machine to prevent pump and heater damage. When the fog fluid level becomes low, as a
safety feature, the heat sensor will make a very loud noise. Simply add more fog fluid to
continue using the Hurricane™ 1101.
Technical Specifications).
Safety Cable
(works with CH-05
from Chauvet)
Fog Fluid Tank
Bracket Adjustment Knob (x2)
Rubber Feet for
Floor Mounting
Hurricane™ 1101 User Manual Rev. 1