Optional Flex Stand Fixed Mount (PN 46-00709)
In the kit, two #8 wood screws have been
provided for fixed mount applications.
When choosing the stand location, make
sure to consider the front orientation of the
stand (indicated in Figure 14).
On a centerline, drill two #39 pilot holes in
the countertop spaced 125 mm (4.92") apart.
The stand base can be used as a guide for
the spacing of the pilot holes.
Secure the stand base to the countertop with
the two #8 wood screws provided.
Figure 15. Stand Base Hole Pattern (Not to Scale)