Download  Print this page

Failure Modes - Honeywell VoyagerGS 9590 Series User Manual

Single-line hand held laser scanner
Hide thumbs

Advertisement

I
NDICATORS

Failure Modes

One Razzberry Tone – On Power Up
This indicates the scanner has experienced a flipper/motor failure.
Return the scanner for repair to an authorized service center.
Three Beeps – On Power Up
If the scanner beeps three times on power up, verify the host and scanner are
set to the same communication protocol.
If the host and the scanner's communication protocol match, then, the
non-volatile memory (NovRAM) that holds the scanner's configuration may have
failed. Try to reconfigure the scanner. If the scanner does not respond after
reconfiguring, return the scanner for repair to an authorized service center.
20

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell VoyagerGS 9590 Series

This manual is also suitable for:

Voyager gs 9590 series