Installing The Optional Wall/Counter Mount - Honeywell MS7120 Orbit Manual

I
NSTALLING THE
Kit #45-45619 contains:
a. Locking Plate
[ 50-50302]
MLPN
b. Base Cover
[ 50-50301]
MLPN
c. Wood Screw, #7 x 1.00"
[ 18-18013]
MLPN
d. Flathead Screw, M3 x 8 mm
[ 18-18004]
MLPN
1. Drill mounting holes
Note the position Orbit will rest (fig. 2).
Use the dimensions provided in
figure 2 or the locking plate
[ 50-50302] as a template to drill
MLPN
three #39 pilot holes.
2. Mount locking plate to wall/counter
Secure the locking plate [
the counter or wall with the three #7 x 1.00" wood
screws [
MLPN
3. Attach the base plate to Orbit
Secure the base cover [
using the four M3 x 8 mm screws [
4. Mount Orbit to locking plate
Hold Orbit 90° clockwise from the desired position then lower it over
the locking plate until it sits flush to the countertop. Twist Orbit counter
clockwise 90°, as shown in figure 5, to lock unit in place.
O W
PTIONAL
MLPN
18-18013] provided.
50-50301] to the bottom of Orbit (fig. 4)
MLPN
/C
ALL OUNTER
Qty. 1
Qty. 1
Qty. 3
Qty. 4
50-50303] to
18-18004] provided.
MLPN
Fig. 4
M
OUNT
a.
d.
b.
Position Indicators
c.
Fig. 1
Fig. 2
Fig. 3
Fig. 5
21