Optional Wall/Tabletop Stand Fixed Mount (PN 46-00885
Drill two #39 pilot holes in the wall spaced 39 mm (1.54") apart on a
Install one #8 wood screw in each of the pilot holes, leaving a space
between the head of the screw and the wall surface.
Locate the two slots marked as "A" on the stand base in Figure 16.
Match the "A" slots on the stand to the heads of the installed wood
Slide the stand over the screw heads and down to lock the stand in place.
Cradle Angle Warning
Figure 18. Cradle Angle Warning