Rec. Timer - Pioneer X-NM1 Operating Instructions Manual

STANDBY SLEEP/
/ON TIMER
FM / AM
7
ENTER
You can set the timer to record
something from the tuner at a time
when you may not be around. For
example, you might want to record a
program on the radio that is broadcast
while you're at work. During the actual
recording, the volume is automatically
set to minimum until you change it
again. Once the recording is finished,
the timer is switched off, and has to be
reset if you plan to record another
broadcast while you're out.
• load a tape
• check the recording direction
• set the reverse mode (p. 17)
Switch to the tuner, and tune into the
station (see page 15 for more detailed
instructions on this).
WAKE UP / REC
TIMER SET UP ?
∞ 5

REC. TIMER

Use the 5 and ∞ buttons to change
the currently displayed option in the
to select. Press 7
menu. Press
anytime to cancel and exit the menu.
First, set the hour:
4 and ¢
Use
and 5) to change the flashing hour
display, then press .
ON AM 7:OO
Next, set the minute:
4 and ¢
Use
and 5) to change the flashing minute
display, then press .
ON AM 7:3O
First, set the hour:
4 and ¢
Use
and 5) to change the flashing hour
display, then press .
OFF AM 8:OO
Next, set the minute:
4 and ¢
Use
and 5) to change the flashing minute
display, then press .
OFF AM 8:15
After pressing , the display shows
you the settings you've just made,
including the switch on and off times
and the station frequency.
(or ∞
(or ∞
(or ∞
(or ∞