Pioneer X-NM1 Operating Instructions Manual page 15

The following steps show you how to
tune in to FM and AM radio broadcasts
using the automatic and manual
tuning functions. Once you are tuned
to a station you can memorize the
frequency for recall later—see More
tuner features on page 21 for how to
do this.
Make sure you have hooked up the AM
FM / AM
and FM antennas. If you haven't, see
7
MENU
pages 8–9 for how to do it.
Press repeatedly to switch between FM
and AM bands.
ENTER ENTER
There are two ways to do this:
•
To search for stations in the currently
selected band, press and hold either the
∞ or 5 button for about a second. The
system will start searching for the next
station, stopping when it has found
one. Repeat this step to search for other
stations. Press 7 at anytime to stop the
search.
•
To change the frequency one step at a
time, press the ∞/5 buttons.
FM 87.5OMHz
AM 531kHz
If you're listening to a stereo FM
broadcast, but find that there is a lot of
noise because of a weak signal, try
switching to mono.
Press repeatedly to switch between FM
and AM bands.
TUNER FM
87.5OMHz
∞
AUTO / MONO
Use the 5 and ∞ buttons to change
the currently displayed option in the
to select. Press 7
menu. Press
anytime to cancel and exit the menu.
2 3
When you choose , the
indicator disappears and
lights in the display.
5