Advertisement
Available languages
Available languages
The tape deck can play both sides of a tape without you
having to take the cassette out and turning it over by
hand.
The reverse mode tells the deck what to do when it
reaches the end of the tape on the side it's playing. There
are three modes: endless, reverse and one-way.
If you're using the front panel, press
(use 5 and ∞ to change the
then select
displayed option in the menu; press
Use ∞ and 5 to choose the reverse mode.
There are three reverse modes:
•
– Plays one side then stops.
•
– Stops after the end of the tape has been
reached in the reverse direction.
•
– Plays the tape round and round
continuously.
In endless mode, the deck will only play the tape
through 16 times before it stops automatically.
You may have connected various other components to
your system. These include a VCR, TV, MD player,
another tape, etc.
You can adjust the sound level using the
on the main unit.
to select).
Depending on what you are listening to, you may want
to change the sound quality to emphasize instruments
or vocals, or to create a live atmosphere.
The current Sound Mode is displayed, and with each
press you can select one of the four modes in the
following order:
•
•
•
live performance
•
: High and low range sounds are emphasized
: Mid-range sounds are emphasized
: The sound is given extra breadth to simulate a
: No effect on the sound
dial
Advertisement
