Advertisement
Available languages
Available languages
STANDBY
/ON
DISPLAY
This system has a built-in clock, which
needs to be set to be able to use the
timer features.
The clock can't be set when the
demonstration mode is active. See page
34 to cancel the demo mode.
AM
12:OO
∞
5
AM
2:OO
∞
5
AM
2:4O
After pressing
, the display shows
the new time briefly, then returns to
standby.
AM
2:4O
• When the system is on, press and
hold
(about three seconds)
anytime to see the clock. In standby,
pressing
will switch on the
display backlight and briefly show the
current time.
If the AC power is cut (blackout,
accidentally unplugging the power
cord), the system will return to the
12:00 display and you will have to set it
again to show the proper time.
You can choose either a 12 or 24 hour
format for the clock. The default is 12
hour display.
The format is changed and the new
clock format is shown in the display.
There are a number of buttons other
than
which will switch
the unit on.
•
,
,
, and
switch the unit on directly in to that
function. (In the case of
, if there is a disc/tape loaded it
will start playing.)
0 on the front panel switches
•
the unit on and opens the disc cover.
and
Advertisement
