IBM System x3200 Installation Manual page 67

Table 4. Abbreviated list of POST error codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v See the parts listing in the Problem Determination and Service Guide to determine
which components are customer replaceable units (CRU) and which components
are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must
be performed only by a trained service technician.
Error code Description
1801 A PCI adapter has requested
memory resources that are not
available.
1802 No more I/O space is available for
a PCI adapter.
Action
1. Make sure that no devices
have been disabled in the
Configuration/Setup Utility
program.
2. Change the order of the
adapters in the PCI, and PCI
Express slots. Make sure that
the startup (boot) device is
positioned early in the
scanning order. (For
information about the scanning
order, see the User's Guide on
the IBM System x
Documentation CD).
3. Make sure that the settings for
the adapter and all other
adapters in the
Configuration/Setup Utility
program are correct. If the
memory resource settings are
not correct, change them.
4. If all memory resources are
being used, remove an adapter
to make memory available to
the adapter. Disabling the
BIOS on the adapter should
correct the error. See the
documentation that comes with
the adapter.
1. If the error code indicates a
particular PCI or PCI-E slot or
device, remove that device.
2. If the error remains, reseat the
each adapter.
3. Replace the following
components one at a time, in
the order shown, restarting the
server each time:
a. Failing PCI adapter
b. (Trained service technician
only) System board
Chapter 5. Solving problems
53