Maintenance; To Reset Motor Thermostat - Shark Navigator UV300 Owner's Manual

Maintenance

Resetting the Motor Thermostat
Your Shark Navigator
®
equipped with a protective Motor
Thermostat. If the motor should
overheat, the thermostat shuts off
the power.
TO RESET THE MOTOR
THERMOSTAT:
Press the Power Button ( )to turn
the unit "Off".
Unplug the vacuum.
Check for clogged hose or filter;
unclog hose and replace filter.
Refer to Checking for Blockages
on page 10.
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Press the Power Switch ( ) to start
the vacuum.
NOTE: If vacuum still does not start,
contact Customer Service at:
1-800-798-7398.
Get even more cleaning from your Shark
Navigator
is
™
Bookmark the page and check back often
to take advantage of the latest products,
ADDITIONAL ACCESSORIES (AVAILABLE FOR PURCHASE):
MULTI-TOOL
Convenient crevice tool and dusting brush in one.
PET/UPHOLSTERY TOOL
Removes hair from upholstery and stairs.
CREVICE TOOL
Reach deep into narrow spaces and clean between cushions,
under radiators and baseboards and in hard to reach crevices and
corners.
NOTE: Some accessories may be included with your
purchase.
To order Additional Parts &
Accessories go to
www.sharkclean.com.
by checking out our cleaning
™
accessories assortment at
www.sharkclean.com.
promotions and prices!
PART
Stretch Hose
Multi-Tool
Foam & Felt Filter
Extension Wand
24" Crevice Tool
11" Crevice Tool
Pet/Upholstery Tool
PART NO.
www.sharkclean.com
English
®
126FFJ
127FFJ
XFL100
1116-FC
122FFJ
129FFJ
128FFJ
11