Testing Your Thermostat - White Rodgers 1F60-22 Installation & Operating Manual

Follow these steps to ensure that your
thermostat is correctly installed. You
may want to refer to YOUR NEW
THERMOSTAT'S COMPONENTS to
help you locate switches you will use
during testing. If at any time during
testing your system does not work as
indicated, stop testing immediately,
disconnect the batteries and the 120v
AC power, and check thermostat
wiring. If wiring is correct, see TROU-
BLESHOOTING YOUR THERMO-
STAT.

TESTING YOUR THERMOSTAT

1. Move the system (Cool-Off-Heat)
switch to the Off position.
NOTE
If you have a heat only system,
omit steps 2 and 3. Go directly
to step 4.
2. (For heat/cool systems only). Move
the fan switch to the Cont. position.
The system fan should come on.
Move the fan switch to the Auto
position. The system fan should turn
off.
13