White Rodgers 1F60-22 Installation & Operating Manual page 18

position, all systems will be off. When
the switch is in the Heat position, the
thermostat will cycle only the heating
system. If you have a heating/cooling
system, when the switch is in the Cool
position, the thermostat will cycle only
the cooling system.
The setback switch allows you to
determine how much the temperature
will change during setback periods. The
switch settings (0 F, 5 F, 10 F, and 15 F)
indicate how much the temperature will
be adjusted during setback periods. You
will find more information about using
the setback switch in PROGRAMMING
YOUR THERMOSTAT.
18
You use the fan switch only if you have
a heat/cool system. When the switch is
in the Auto position, the fan will cycle
automatically when the heat/cool system
turns on. When the switch is in the Cont.
position, the fan will run continuously.
The option switches allow you to adjust
your thermostat to meet your needs.
You will find more information about the
option switches in SETTING OPTION
SWITCHES.
You use the reset button if you want to
cancel any thermostat programming.
You also use this button to override
minimum cycle times.