Components - White Rodgers 1F60-22 Installation & Operating Manual

YOUR NEW THERMOSTAT'S COMPONENTS
Your thermostat consists of two parts:
the base and the cover. To remove the
cover, grasp it and pull it out from the
base. Take a few minutes to become
familiar with the location of switches and
buttons on the thermostat. You will use
them during installation and operation of
your new thermostat. To replace the
cover, align the cover with the base and
push until it snaps into place. Do not
force the cover onto the base, as this may
damage the thermostat.
1. Liquid Crystal Display (LCD)
2. 1 /3 Differential Switch
3. Fuse
4. Terminal Screws
5. Temperature-Set Sliding Switch
6. Gas/Electric Heat Switch
7. Reset Button
8. Fan Switch (used on heat/cool systems only)
9. Setback Switch
10. System (Cool-Off-Heat) Switch
11. Batteries
12. SET BACK Button
13. TIME SET Button
14. F /C Switch
2
1
3 1
F
14
C
12 11
13
Figure 1. Thermostat base
3 4
W Y G R
10
9 8 7
5
6
7