Sending A Fax; Memory Transmission - imagistics sx1480 User Manual

Sending a fax

Memory transmission

1
Switch to the Fax mode by pressing [COPY
Fax Ready
Feb 10 2006
2
Place your document on the ADF. (See page 2-11 for details.)
3
Adjust the scanning resolution and contrast. (See page 4-2.)
4
Dial the fax number.
• Use the numeric keys to dial the number.
–or–
• Press a one-touch key. (See page 3-6.)
–or–
• Press [Speed Dial /Group] and the three-digit code. (See page 3-8.)
–or–
• Use call group dialing. (See page 3-10.)
–or–
• Use the phone directory dialing. (See page 3-11.)
5
Press [Start]. (If you pressed a one-touch key, no need to press [Start].)
By pressing [Start], you have given your machine a command.
This command number appears on the first line of the LCD for a few seconds. You will
need to know this command number if you want to cancel the transmission or print a
stored document (See "
== Command:01 ==
6
At the end of the operation, your machine beeps and displays:
**
Whenever you transmit a document, what actually appears on the top line of the LCD depends
on the information stored in the remote fax machine. The line may even be blank.
NOTE: If you want to cancel a transmission during document scanning, press [Stop].
If you want to cancel a transmission that is in progress, use the Review Commands
feature.
See "Reviewing or canceling commands" on page 4-7.
NOTE: If the call fails, see "Redialing" on page 4-6.
4-4 s
endInG faxes
2:15pm
Reviewing or canceling commands
Complete **
FAX SCAN].
4 4
" on page 4-7).