Selecting The Copy Paper Size For Copying; Copy Paper Size - imagistics DF260 Operating Manual

2. Selecting the Copy Paper Size for Copying

Copy Paper Size

When two or more types of papers are loaded, the paper size can automatically be selected in accor-dance
with the document size. It can also be selected manually.
The copier automatically reduces or enlarges the copied image size in accordance with the copy paper
size if Auto Size is selected as the zoom ratio when printing on a different size paper to the original
document. "Selecting the Zoom Ratio for Copying"
Automatic Paper Selection Function automatically selects the paper in accordance with the document
size, direction, and zoom ratio. The automatic paper selection function has been preset in the factory. It
can also be set to select a determined copy paper drawer as a priority. "Settings for Copying" p. 9-31
If an irregularly sized document is set (any size other than Letter or Legal), the document size may not be
detected correctly, and may be copied on the wrong size paper or not at all. In this case, manually select
the copy paper drawer.
Useful Tips
• When the Automatic Document Feeder is used for copying, the copy size will be determined by the
first page of the document, and it will continue to copy on the same size paper as the first page for
the remainder. (This does not apply to the case when the 'Mixed Original Detection' setting has been
selected.)
• When Letter size paper is selected for copying, even if the document and paper direction differ, the
direction of the paper can automatically be rotated by 90º for copying. (This function cannot be used
when the Book Scanner is used for copying after selecting the paper.)
Using the Paper Drawer
Load the document in the unit.
1
"Handling Documents" p. 1-20
Press the Copy key.
2
Utility Mode Check
Start
Pause Fax Copy
Access
Interrupt
Stop
Panel Reset
1166O346AB
p. 2-9
Basics
Select , and touch
3
2-5
Paper
.
1171P009EA