Vitek VT-PTZ220N User Manual
  1. Manuals
  2. Brands
  3. Vitek Manuals
  4. Security Camera
  5. VT-PTZ220N
  6. User manual

Vitek VT-PTZ220N User Manual

Envi series 2.0 megapixel 20x network ptz camera with poe
Hide thumbs Also See for VT-PTZ220N:
Table of Contents

Advertisement

Quick Links

Download this manual
• 1/2.8" 2.0 MegaPixel Sony® Exmor™ Progressive Scan CMOS Sensor
• Up to 30fps live view @ 1920 x 1080p
• High speed PTZ operation from 0.1°/sec to 420°/sec.
• XDNR Noise Reduction (Utilizes both 2DNR & 3DNR)
• 16:9 Video format
• True Day/Night with ICR & DSS
• H.264/MJPEG Dual Streaming
• Full duplex 2 way audio, Alarm IN/OUT
• Minimal Latency w/Max 16 User Connections
• Onvif Compliance
• MicroSD Card Slot supporting up to 64GB cards for Onboard EDGE Recording &
Playback
• 12VDC & PoE Plus (Power over Ethernet)
• 3 Year Warranty
Specifications & installation procedure subject to change without notice.
Visit www.vitekcctv.com for the most current information available.
VT-PTZ220N
ENVI Series 2.0 MegaPixel 20x
Network PTZ Camera with PoE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VT-PTZ220N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vitek VT-PTZ220N

Summary of Contents for Vitek VT-PTZ220N

  • Page 1 VT-PTZ220N ENVI Series 2.0 MegaPixel 20x Network PTZ Camera with PoE • 1/2.8” 2.0 MegaPixel Sony® Exmor™ Progressive Scan CMOS Sensor • Up to 30fps live view @ 1920 x 1080p • High speed PTZ operation from 0.1°/sec to 420°/sec.

  • Page 2: Table Of Contents

    Table of Contents 1. Box Contents..........................6 2. Included Accessories ........................ 6 3. Available Accessories ........................ 6 3.1. Optional Mounts & Housings ..................6 4. VT-PTZ220N Installation ......................7 4.1. Surface mount Installation .................... 7 4.2. Connections ......................... 8 4.3.
  • Page 3 ENVI Series: VT-PTZ220N 12.2. Date & Time....................... 38 12.3. Admin Password ......................39 12.4. Access Control ......................39 12.5. User Registration ......................39 12.5.1. Add ......................... 39 12.5.2. Edit ......................... 41 12.5.3. Delete ......................41 13. Network Configuration ......................41 13.1.
  • Page 4 ENVI Series: VT-PTZ220N 17.3. Reboot ........................79 17.4. Factory Default ......................79 17.5. System Update ......................80 18. ENVI Series Viewer....................... 83 18.1. Introduction ....................... 83 18.2. Key Features ......................83 18.3. System Requirement for PC..................83 19. Installing and Uninstalling ..................... 84 19.1.
  • Page 5 ENVI Series: VT-PTZ220N 27. Quick Start Guide ....................... 105 27.1. EN-V-R Configurator User Interface ................105 27.2. Searching for IP Devices ................... 106 27.3. Registering IP Devices ....................107 27.4. Viewing Live Video ....................110 27.5. Recording Video ....................... 111 28.
  • Page 6 ENVI Series: VT-PTZ220N 34.1.5. System, Network Configuration–IP CCTV-DNS ..........144 35. IP-CCTV DNS Registration ....................145 36. IP-Device Registration ......................151 36.1. IP-Device Registration (Manual) ................151 36.2. IP-Device Registration (Automatic) ................153 IP-Device Modification ....................155 36.3. IP-DeviceDeletion ..................... 157 36.4.

  • Page 7: Box Contents

    ENVI Series: VT-PTZ220N 1. Box Contents 1) VT-PTZ220N 20x IP PTZ Camera 2) Mounting Hardware &Accessories 4) ENVI Series CD 2. Included Accessories Surface Mount Housing Qty: 1 Mounting screws Qty: 3 Alarm/Multi Cable Qty: 1 ENVI Series CD Qty: 1 3.

  • Page 8: Vt-Ptz220Ninstallation

    ENVI Series: VT-PTZ220N 4. VT-PTZ220NInstallation • Remove by unscrewing the surface mount housing (See Fig. A). Simultaneously push the right and left hooks from the camera, this will free the camera from the base. (See Fig. B) 4.1. Surface mount Installation •...

  • Page 9: Connections

    ENVI Series: VT-PTZ220N 4.2. Connections 1. Power Depending on the type of installations, apply power to the camera by one of the two options below. a) Via Ethernet – Use only with POE + switch (100 Meters max distance) b) 12VDC - Use with 12VDC 2A ** SEE IMPORTANT NOTES BELOW ** Primary and secondary grounds are completely isolated to avoid possible ground-loop problems.

  • Page 10: Removable Storage

    ENVI Series: VT-PTZ220N 3. Alarm Connections This camera supports Alarm IN/OUT (x2), Green = alarm IN, Blue = alarm OUT. (For more information, refer to Section 14.4DI (Sensor Input) / DO (Alarm Output) on page 62) 4. Audio In/Out This camera supports Audio IN/OUT for more information (Enable Audio under Web-Admin >Device control >camera and motion configuration.

  • Page 11: Attaching Ptz Camera To Base

    ENVI Series: VT-PTZ220N 4.4. Attaching PTZ Camera to Base a) Place the camera on to the Guide and push upwards, you will hear a click from the camera snapping in to the base. b) Screw back the Surface Mount Housing in to Place.

  • Page 12: Camera Software Installation

    ENVI Series: VT-PTZ220N 5. Camera Software Installation 1. Run IP Installer Software from the CD program on a computer that is on the same network as the IP camera. 2. StartIP Installer, by double clicking the icon “IP Installer” 3. After the program has started, the main window of IP Installer program will appear on the screen as shown below.
  • Page 13 ENVI Series: VT-PTZ220N 7. After the camera was configured by the program automatically, you will be able to get access Go Product Homepage a) Right click over the camera information, “ ” Connect Product Homepage b) Click over the icon “...
  • Page 14 ENVI Series: VT-PTZ220N On Live View you will be able to see live video from your camera. NOTE: For more information, refer to Section 10. ENVI Admin Menu on page 35.

  • Page 15: Vt-Ptz220N Features

    ENVI Series: VT-PTZ220N 6. VT-PTZ220N Features 2.0 MegaPixel 20x Network PTZ Camera with PoE +1/2.8” 2.0 MegaPixel Sony® Exmor™ Progressive Scan CMOS Sensor • Up to 30fps live view @ 1920 x 1080p • High speed PTZ operation from 0.1°/sec to 420°/sec.

  • Page 16: Ip Installer: Introduction

    Installing IP Installer If the program is started from the CD supplied with Vitek products, insert the CD in to CD/DVD tray and check the installation file. If it is download or copied from the Internet or any other media, locate the file from the PC’s hard drive.
  • Page 17 ENVI Series: VT-PTZ220N You may be prompted to continue running the installation program. Click Yes button, then the following window will be shown on the screen. To continue the installation, click Next. The following window will be displayed for location to...
  • Page 18 ENVI Series: VT-PTZ220N The default location for installation is C:\Program Files\IP Installer. It is recommended to install in this folder, if you want to change it to a different location, click the Browse button to choose location. Now click the Install button. You will see the progress of theinstall as shown below.

  • Page 19: Uninstalling Ip Installer

    ENVI Series: VT-PTZ220N When the files are done copying, the following window will be shown. Click the Finish button to complete the installation. 8.2. Uninstalling IP Installer If you want to remove the IP Installer program from your PC, click Start > All Programs > IP Installer >...
  • Page 20 ENVI Series: VT-PTZ220N Click onthe Yes button, then the following window will be shown on the screen. Click on the Next button and you will see the following window. Click on the Uninstall button to start removing the IP Installer program from your computer.
  • Page 21 ENVI Series: VT-PTZ220N Click on the Finish button to close the window...

  • Page 22: Using Ip Installer

    There are no network devices shown,as it is the first time running the program and nothing has been registered. Scan the network and shows the list of all the Vitek products that IP Search Product Installer program found.

  • Page 23: Search Product

    9.2. Search Product Make sure that your Vitek products are powered and connected to the network, and then click the Search Product button. A status window will pop up to show the progress of the search. Wait until it reaches 100%, or you may press the Cancel button to stop the search at any given timeand proceed with the results made until that moment.

  • Page 24: Manual Network Setup

    ENVI Series: VT-PTZ220N 9.3. Manual Network Setup Configuring the network parameters of the devices in the list can be started either by highlighting and right clickingmouse button or by clicking Manual IP Setupbutton on the main Toolbar. When one IP device is selected, the following screen will appear MAC Address MAC address of the selected device is shown.
  • Page 25 Password for the IP device. (Admin Password) (Default password for Vitek products is “root” unless already changed) Select whether the configured contents is to be saved in the Camera memory or not. Save Configuration: Changed values will be saved in the Camera memory of •...

  • Page 26: Automatic Network Setup

    HTTP port number of the IP device for web access to homepage. Password Password for the IP device.(Default password for Vitek products is “root”) If you click Apply to all button after changing just a field of one IP device, the remaining IP devices will have the same value for that parameter.
  • Page 27 (IP Address, Netmask, Default Gateway, DNS1, DNS2) Authentication Password for the IP device. (Default password for Vitek products is “root”) (Admin Password) Select whether the configured contents is to be saved in the Camera memory or not.
  • Page 28 ENVI Series: VT-PTZ220N Note: If your network has more than one IP address Zone at the same time, the confirmation window will be displayed as below. You need to choose the one you are going to use for your IP devices.

  • Page 29: Using Dhcp Server

    ENVI Series: VT-PTZ220N 9.5. Using DHCP Server If your network has a DHCP server running for assigning IP addresses, you may choose to let it assign IP addresses to the IP devices on the list. To do that, first open the Network Setup window either by Manual IP Setup or Automatic IP Setup procedure.
  • Page 30 Password for the IP device. (Admin Password) (Default password for Vitek products is “root” unless already changed) Select whether the configured contents is to be saved in the Camera memory or not. Save Configuration: Changed values will be saved in the Camera memory of •...

  • Page 31: Updating Firmware

    IP Installer window. In the above picture, the firmware version of this product is 4.14-01-ds while the latest firmware version available is 4.16-B0-ds-VI as you could see at Vitek’s homepage (http://www.vitekcctv.com/Downloads.asp). If you decide to update the firmware, first create a folder on your computer for the update firmware, than download the latest firmware to that folder.
  • Page 32 ENVI Series: VT-PTZ220N After clicking OK the following window will be displayed. Note: Do not CLOSE window until completed, to avoid permanent damage to the camera. You can also select multiple IP devices at the same time, and have them start firmware updating in a single step.

  • Page 33: Filter Configuration

    ENVI Series: VT-PTZ220N 9.8. Filter Configuration When you need to search only for the IP device having a specific range of MAC or IP addresses, you can do it by using this feature. To set the search condition, click Filter Configuration button on the Toolbar, then the following window will show up on the screen.

  • Page 34: Live View

    ENVI Series: VT-PTZ220N To start searching with this condition now, click Search Product button on the toolbar. The program will start searching and show the result after a moment. 9.9. Live View Once searching and configuration on IP devices are done, you should make sure that the IP devices are accessible with the new settings.
  • Page 35 ENVI Series: VT-PTZ220N Click Live View on the top right of the window, then ENVI Series Viewer ActiveX program will be started. If you have not installed the ENVI Series Viewer program before, it will ask for a confirmation to install it. Allow it and you will be able to find out whether the configuration by IP Installer program is properly done.

  • Page 36: Envi Admin Menu

    After connecting to a VITEKENVI Series camera via web browser, you’ll find the web page as shown below. The upper rightmost item of the menu is Admin; this is where you can set up most of the features in the VITEK camera you’re connected to. 10.1.

  • Page 37: Admin Menu Structure

    ENVI Series: VT-PTZ220N 10.2. Admin Menu Structure The following table shows the hierarchy of the Admin menu structure that we’re going to deal with in this manual. 11. QuickConfiguration In Quick Configuration, you will be able to set up many of the essential parts of the configuration in a simple manner without going into details.

  • Page 38: Step 4: Ipcctvdns.com

    ENVI Series: VT-PTZ220N 11.4. Step 4: IPCCTVDNS.COM When VITEK Server is used in a Dynamic IP environment, it is required to utilize IPCCTVDNS feature. Refer to Section 35. IP-CCTVDNS Registration on page 145to see how to set up. 11.5. Step 5: Recording Configuration Vitek cameras with MicroSD card can be configured for recording options in this section.Refer to...

  • Page 39: Date & Time

    ENVI Series: VT-PTZ220N As an administrator, you can change the name of the camera/ server, but other values are not allowed to be changed. To change the camera/ servername, enter a new name in the Server Name field. You may use up to 21 alphanumeric or up to 10 Unicode characters. Tab or any other special characters are not allowed.

  • Page 40: Admin Password

    Apply button to put it into effect. Because you have replaced the password with a new one, the existing network connection made with old password to VITEK camera is lost now. You will have to reconnect to the VITEK camera using new password.
  • Page 41 ENVI Series: VT-PTZ220N Enter aUser ID between 4 and 23 alphanumeric characters. In bothPassword and Confirm Password fields, enter the identical password respectively. The password must be between 4 and 23 alphanumeric characters. In Name filed, enter the user’s name up to 23 alphanumeric characters.

  • Page 42: Edit

    ENVI Series: VT-PTZ220N VS Module ID: VS Module is a network device that has been registered in theVITEKcamera • Camera No.: Among the cameras of the VS Module select one to set up. (between all,1or2) • Alarm Control: Determine if Alarm control is to be allowed.

  • Page 43: Static Ip Configuration

    ENVI Series: VT-PTZ220N 13.1. Static IP Configuration Select Network Configuration under Network configuration For static IP, select Static IP and input IP address, NetMask, Gateway, DNS1, DNS2 and click apply to save settings. After apply, program will ask to close web browser for updates, which will take 20~30 seconds.

  • Page 44: Pppoe Configuration

    ENVI Series: VT-PTZ220N 13.3. PPPoE Configuration PPPoE is used to connect VITEK products to a PPPoE modem provided by the ISP. Since PPPoE needs verification, ID and a password are necessary to access the network. Type in PPPoE user ID and password 13.4.

  • Page 45: Bandwidth Control Configuration

    ENVI Series: VT-PTZ220N 13.5. Bandwidth Control Configuration Bandwidth control is for limiting maximum network traffic. If it is enabled with Bandwidth limits, maximum data size transferred from VITEKcameras won’t exceed bandwidth limits set by users. If transferred data is exceeded, part of the data will be randomly lost.

  • Page 46: View Network Status

    ENVI Series: VT-PTZ220N 13.6. View Network Status This menu shows network status of VITEKcameras. 13.7. Network Status Notify This feature helps to send updated network status information to registered email address if any changes happen. This function will work under DHCP or PPPoE.

  • Page 47: Ip-Cctv Dns Setup

    ENVI Series: VT-PTZ220N First, select Enable to use the feature. Then enter the address of the SMTP server which is needed for email service. If your SMTP server requires a user ID and a password for authentication, you will have to Enable Authentication Loginand enter the user ID and Password.

  • Page 48: Port Forwarding & Upnp

    ENVI Series: VT-PTZ220N 13.9. Port Forwarding & UPnP UPnP(Universal Plug and Play)is a kind of network protocol to help users to find and configure network products in the same local network area. Port forwarding is to assign a certain network port to a network product so users can access it from outside of the Local Area Network.

  • Page 49: Rtp/Rtsp Setup

    ENVI Series: VT-PTZ220N 13.10. RTP/RTSP Setup Factory default is Enable to be used with other manufactures VMS software’s RTSP (Real-Time Streaming Protocol) is a protocol to transfer video and audio streams over the network. Any application supporting Standard RTSP can be used for VITEKcameras. Quick Time Player or VLC program can be used withthis;...
  • Page 50 ENVI Series: VT-PTZ220N Enable: Start RTSP service Service Disable: Stop RTSP service In normal case, use default port number 554 to connect to RTSP service. If not using port 554, enter the port number you want to use. RTSP Port e.g.) port number 445==>rtsp:// network video server ip...

  • Page 51: Device Configuration

    ENVI Series: VT-PTZ220N 14. Device Configuration 14.1. Privacy Zone Users can set a privacy zone if a certain part of the screen needs to be unmonitored. To set the region, click Privacy Zone from Device Configuration category. To Add a Privacy zone click Newbutton, aGreen-colored box will appear, click on the Green box and it will turn Red, at this point you can resize it by clicking and holding any corner and drag to desired size.
  • Page 52 ENVI Series: VT-PTZ220N Users can add up to 8 Privacy Zones per screen by repeating above steps. If you add more than 8, an error message will display on the screen. To delete a privacy zone, click the zone and click Delete button followed by Apply button.

  • Page 53: Ptz

    ENVI Series: VT-PTZ220N 14.2. This section will allow you to assign Presets, Scans, Patterns and Tours. 14.2.1. PTZ Preset • Speed:Not used for Presets, fixed at 420° per sec. • PTZ Move Mode: Not used for presets, fixed on Continuous •...

  • Page 54: Ptz Scan

    ENVI Series: VT-PTZ220N 7. Click the “Set” button to set camera function. 8. Click the “Apply” button to store preset. 14.2.2. PTZ Scan The function of Scan is to move the camera automatically between two defined points. • Speed: not used under PTZ Scan.

  • Page 55: Ptz Pattern

    ENVI Series: VT-PTZ220N 4. Position the camera to the Stop location using the navigation buttons then press “End” button. 5. Select the scan Mode: On(Normal) / On(Diagonal) 6. Select the scan Speed 1~8 8 being fastest 7. Select the scan Direction.

  • Page 56: Ptz Tour

    ENVI Series: VT-PTZ220N 14.2.4. PTZ Tour With the PTZ Tour you can combine different camera functions previously configured, such as Patterns,Presets, Scans and Tours. 8 programmable tours are available each tour can consist of up to 8 functions (Preset, Pattern, Scan or other Tours).

  • Page 57: Camera & Motion

    ENVI Series: VT-PTZ220N 14.3. Camera & Motion This menu is used to set up the selection of video format, data added to video data, encoding speed, audio control, image resolution, video quality, motion detection, etc. Click Camera & Motion on Device Configuration menu. The configuration menu will be displayed, and it may be different between VITEKcameras.
  • Page 58 Audio: (not available on all models) Select if Audio function is to be used (applies to Primary • Stream only). VITEK Cameras provides 2-way audio streaming by combining microphone input with video data. Users can listen to the streamed audio through a PC and speakers.

  • Page 59: Camera Configuration

    ENVI Series: VT-PTZ220N Frame Rate: For Primary Stream, this is the number of frames compressed in every second. • You can control the network traffic with this parameter. For Secondary Stream, it can be set to a manner of 1/2, 1/4, 1/8... of the primary stream.
  • Page 60 ENVI Series: VT-PTZ220N Rate Control Mode Image Quality:one of 6 quality levels Rate Control Mode:VBR (Variable Bit Rate) (Low Compression / Highest /High Video frames are encoded with selected Normal / Low / Lowest) image quality and GOP. Encoded frames have GOP Structure: Distance between I- different data size from each other.
  • Page 61 ENVI Series: VT-PTZ220N Focus Mode:Manual, Auto or One-Push (Default is Auto) • Focus Sensitivity: Low, Normal (Default is Normal) • Focus Limit: used with Manual Focus ( Default is 32cm) • White Balance Mode: Auto, indoor, outdoor, ATW, Manual. In manual mode you can •...
  • Page 62 ENVI Series: VT-PTZ220N Exposure Slow Shutter: Turn On/Off Slow Shutter • Exposure Day & Night: Auto, B/W, Color. In “Auto” Day time will be Color and Night time • will be Black & White. In “B/W” camera will stay in Black & White. In “Color” camera stays Color Exposure Bright Offset: -7~+7.

  • Page 63: Di (Sensor Input) / Do (Alarm Output)

    ENVI Series: VT-PTZ220N After all the settingsare done, click Apply button to save it. If Default button is clicked, all the fields return back to original value. 14.4. DI (Sensor Input) / DO (Alarm Output) Select DI/DO from Device Configuration menu to name and configure Sensor Input and Alarm Output.

  • Page 64: Advanced Configuration

    ENVI Series: VT-PTZ220N 15. Advanced Configuration There are two types of advanced service, one is Buffered Service and the other is Periodic Service. In Buffering Service, a series of images are continuouslybeing stored in a buffer memory of thecamera/server for a certain period of time. When the camera/server is triggered by an event or schedule, the images or alarm statusjust before and after the event/schedule are reported to you by email or buffered FTP services.

  • Page 65: Advanced Services

    ENVI Series: VT-PTZ220N 15.1. Advanced Services Pre-Alarm buffer size and buffering speed can be defined here. Pre-Alarm Buffer Size: You can set the buffer size which will store the images before • event. The unit is in frame, and each channel can be set with different values. The total number of frames for Pre-Alarm Buffer and Post-Alarm Buffer is limited to 10 frames.

  • Page 66: E-Mail Service Configuration

    ENVI Series: VT-PTZ220N 15.1.1. E-mail Service Configuration Email configuration is set up here for Alarm in case any event occurs. Item Description Camera 1~2 Select a channel to be configured for email notification Service Select Enable in order to use this service SMTP server address Enter SMTP server’s address for sending email.
  • Page 67 ENVI Series: VT-PTZ220N E-mail Service Setup for Each Channel For each channel, the following items can be configured for email service: Condition, Post-Alarm Buffer Size, and Post-Alarm speed. The content of text message and display style of DI value can be configured as well.
  • Page 68 ENVI Series: VT-PTZ220N After finishing setup, click Save button to apply. If you don’t want to change, click Back button. Condition, Schedule & Event Configuration If you click on a Condition link, the Advanced Service windows is displayed as shown below.

  • Page 69: Ftp (Buffered) Service Configuration

    ENVI Series: VT-PTZ220N 15.1.2. FTP (Buffered) Service Configuration Item Description Camera 1 - Camera Select which channel to set up for FTP (Buffered). Select Enable to use the FTP (Buffered) service. Otherwise select Service Disable. Server Address FTP Server Address.
  • Page 70 ENVI Series: VT-PTZ220N User ID Enter a User ID to log in to FTP server. Password Enter the Password for the user ID to log in to FTP server FTP Control Port Port number for FTP server (Normally 21 is used)

  • Page 71: Ftp (Periodic) Service Configuration

    ENVI Series: VT-PTZ220N Item Description Condition 1 ~ Select a condition for FTP (Buffered) service to be activated. Up to 3 Condition 3 conditions can be set. Pre-Alarm Buffer Size The Buffer size assigned for Pre-Alarm. Check Video buffer Click this link to go to Advanced Services for video buffer setup.
  • Page 72 ENVI Series: VT-PTZ220N Item Description Camera 1 - Camera 2 Select which channel to set up for FTP (Periodic) service Select Enable to use the FTP (Periodic) service. Otherwise select Service Disable. Server Address FTP Server Address. The directory in FTP server where the data will be uploaded.

  • Page 73: Recording Configuration For Cameras With Microsd Card

    MicroSD Configuration If a microSD card (SD card) is not present in the slot already, power down the VITEK IP camera before inserting an SD card. Make sure to turn the power on after inserting the SD card. Open a web browser, type in the IP address of the VITEK camera.
  • Page 74 ENVI Series: VT-PTZ220N If entire SD information is showing “-NONE-” this means SD card is not formatted, in this case click Note: Be sure to turn off the device before installing a SD card. Otherwise, the SD card may become defective. Always check the recommended type of SD card because non-conforming SD cards can cause abnormal behavior of the system.
  • Page 75 ENVI Series: VT-PTZ220N Note: if program is terminated during the “Format” process SD Card might be damaged After formatting is completed the following screen will be displayed Click OK and you will be brought back to the “SD Status & Format screen” click on “Reboot”...

  • Page 76: Recording Configuration With Microsd Card

    ENVI Series: VT-PTZ220N 16.2. Recording Configuration with microSD card Each camera has 2 streams (referred as Camera 1 / Camera 2 (see image below)) which can be configured for recording options in this section. Configuration items include motion detection recording, 24-hour continuous recording, event-driven recording, etc.
  • Page 77 ENVI Series: VT-PTZ220N Select Condition 1andthe following window will be display. Enable / Disable...

  • Page 78: Utilities

    ENVI Series: VT-PTZ220N By clicking on Enable you will be able to select your mode (Always, Schedule only etc). in this example we will be selecting “Event Only”. Schedule Under Scheduleyou can select time and date for motion recording if left blank motion recording will be 24hrs, 7 days a week.

  • Page 79: System Log

    System log file provides you the information about when and who access’ the contents of VITEKCameras such as HTTP file or CGI programs. In each line, log data consists of date, time, category, IP address, user ID. 17.2. Save Configuration VITEK cameras save the configurations after every step.

  • Page 80: Reboot

    ENVI Series: VT-PTZ220N 17.3. Reboot It is recommended to reboot the system after making changes to the configuration. To reboot, click Reboot on Utilities menu. A screen will display to confirm a system reboot, click ok to continue. Windows Internet Explorer will ask to close the webpage, click Yes.

  • Page 81: System Update

    ENVI Series: VT-PTZ220N 17.5. System Update ** Is Highly Recommended to Use the IP Installer Program for This Process ** Once IP devices are searched and shown on the screen as functioning successfully, you can update the firmware of them using the“IP Installer” program. To do that, first check the firmware version...
  • Page 82 ENVI Series: VT-PTZ220N In the above picture, the firmware version of this product is 4.14-01-ds while the latest firmware version available is 4.16-B0-ds-VI as you can see at Vitek’s homepage (http://www.vitekcctv.com/Downloads.asp). If you decide to update the firmware, first create a folder on your computer for the update firmware, than download the latest firmware to that folder.
  • Page 83 ENVI Series: VT-PTZ220N Note:Do not CLOSE window until completed, to avoid permanent damage to the camera.

  • Page 84: Envi Series Viewer

    TCP/IP network. ENVI Series Viewer works with EN-V-R network video software, Vitek Network Video Servers, Network Video Recorders, and Network Cameras to show real-time live video images and enables users to control audio, Relay Output, and PTZ functions.

  • Page 85: Installing And Uninstalling

    19.1. Installing ENVI Series Viewer Connect to the Vitek Camera/Server using Internet Explorer, and click Live View on the main page. Then ENVI Series Viewer will be automatically downloaded and installed. If an Internet connection is not available, it's possible to manually install the program file in advance (from supplied CD) and connect to the Vitek Camera / Server later.
  • Page 86 ENVI Series: VT-PTZ220N Click the Install ActiveX Control, and the pop-up window will be displayed as above. Click the Install button. Click “YES” to allow program to run. After the installation is successfully completed, ENVI Series Viewer window will be displayed.

  • Page 87: Manual Installation

    ENVI Series: VT-PTZ220N 19.1.2. Manual Installation When an Internet connection is not available or having some difficulties, you can manuallyinstall from the supplied CD usingENVI Series Viewer program file.Execute the downloaded file, and you will see the ENVI Series Viewer Setup Wizard window as shown below. Click the Install button to start installing.

  • Page 88: Uninstalling Envi Series Viewer

    ENVI Series: VT-PTZ220N 19.2. Uninstalling ENVI Series Viewer There are two ways to uninstall ENVI Series Viewer program from your computer. Before uninstalling, close all the Internet Explorer windows. 19.2.1. Uninstalling with Program Menu Click Uninstall and the following window will be shown. Click the Yes button.

  • Page 89: Uninstalling On Control Panel

    ENVI Series: VT-PTZ220N 19.2.2. Uninstalling on Control Panel Click Start button on the screen, then select the Control Panel. In the Control Panel window, double-click the Add or Remove Programs icon.

  • Page 90: Starting Envi Series Viewer

    You will see the Uninstall or change a program list. Click ENVI Series / (Smart Viewer) button, and then right click Uninstall /Changebutton. Then, it will start uninstalling the program. 20. Starting ENVI Series Viewer Once ENVI Series Viewer is installed in your computer, you can start it by connecting to the Vitek...

  • Page 91: Control Bar

    Camera / Server using Internet Explorer and select Live View on the main menu. The appearance of ENVI Series Viewer window varies depending on what type of Vitek Server is connected (Network Video Server, Network Camera, or Network Video Recorder).

  • Page 92: Channel Control Bar

    ENVI Series: VT-PTZ220N 20.2. Channel Control Bar Displays or hides live view video from channel 1 Displays or hides live view video from channel 2 Displays or hides live view video from ALL channels No Display 20.3. OSD Channels Buttons 20.3.1.

  • Page 93: Saving As Video File

    ENVI Series: VT-PTZ220N 20.3.2. Saving as Video File In ENVI Series Viewer, Live video currently displayed can be captured and recorded as a video file in AVI format. Select a live view you want to save, and click RecAvi button on OSD ChannelButtons.

  • Page 94: Instant Playback

    ENVI Series: VT-PTZ220N can be recorded to the microSD card by clicking this button. The recorded video can be viewed by Instant Playback feature of OSD Channel Buttons or by running ENVI Series Player program. To Max duration is 1 minute finish, click the icon again.

  • Page 95: Extended Features

    ENVI Series: VT-PTZ220N Set the beginning of video data. Instant playback will scan 1 min after this. Se the playback speed. Begin searching data Playback Reverse playback. 1 frame playback 1 frame reverse playback Pause Stop 20.4. Extended Features When you click the right mouse button on the Live View Window, a pop-up menu will appear for extended features as shown below.

  • Page 96: Flip Control

    ENVI Series: VT-PTZ220N 20.4.3. Flip Control Flip Control: The horizontal view of the image can be changed using the (mirror) function. The vertical view of the image can be changed using the (flip) function.

  • Page 97: En-V-R: Introduction

    ENVI Series: VT-PTZ220N 21. EN-V-R: Introduction This User's manual explains how to set up EN-V-R software in your PC. EN-V-R is the integrated system software for video security applications, which runs on Microsoft’s Windows-based computers. Some of major features of EN-V-Rare listed below.

  • Page 98: Requirements For Installation

    ENVI Series: VT-PTZ220N 22. Requirements for Installation 22.1. EN-V-R Versions EN-V-R is supplied to customers in different versions for each appropriate application. Users will need to choose the right versions for their needs. Support Version Register Time Recording Retransmission Max Recoding...

  • Page 99: Installing En-V-R

    You may encounter the following security warning. To continue installing the program, click Yes button. Then select language for installation. You will see the below window, then click Next button. The default location for installation is C:\Program Files\Vitek. It is recommended to install in this folder,...
  • Page 100 ENVI Series: VT-PTZ220N but if you want to change it to another location, click Browse button to choose a proper path. Now click Install button. You will see the progress of copying install files to the hard drive as shown below, once is completed click on NEXT.

  • Page 101: Uninstalling En-V-R

    ENVI Series: VT-PTZ220N Enter the proper Admin Password. The default password is root. The following screen will be displayed, click OK to continue. Now you will see EN-V-R Configurator window on the screen. To use EN-V-R Configurator program, refer toSection26.Starting EN-V-R Configuratoron page 103.

  • Page 102: Executing Uninstaller

    Then the EN-V-R icon disappears, and you know that EN-V-R is no longer running on your computer. Now you’re ready to start uninstalling. 24.2. Executing Uninstaller To start uninstalling, click Start >All Programs >Vitek>EN-V-R>Uninstall. When the following window appears, click YES button. The progress of uninstalling is displayed.

  • Page 103: Components Of En-V-R Program

    ENVI Series: VT-PTZ220N After all the install files are deleted, the following window will be displayed. Click OK button on the following window to complete the uninstalling. 25. Components of EN-V-R Program EN-V-R Service, EN-V-R Configurator, and EN-V-R Controller EN-V-R consists of three programs, ( 25.1.

  • Page 104: En-V-R System Tray Menu

    ENVI Series: VT-PTZ220N 25.4. EN-V-R System Tray Menu After you finish installing EN-V-R, you will find the EN-V-R icon on the system tray, which is located right, bottom part of the Windows desktop. Move the cursor over the icon, and right click. The following pop-up menu will show. You can open EN-V- R Configurator or EN-V-R Controller program from this menu, or you can go to the Home page of the EN- V-R program for live view or playback.
  • Page 105 ENVI Series: VT-PTZ220N You may encounter the security window as below. Click Yes button to continue. Once EN-V-R program starts, a log-in window will be displayed as below. Type in the proper admin password and click the OK button. The default admin / password is root.

  • Page 106: Quick Start Guide

    ENVI Series: VT-PTZ220N 27. Quick Start Guide EN-V-R is full-functioning Network Video Recorder software that runs on your PC. When started for the first time after EN-V-R is installed, there is no IP devices connected. To add a camera to the EN-V-R you must register the camera first. Then EN-V-R knows what IP devices they are, how to connect to them, and how to use them.

  • Page 107: Searching For Ip Devices

    ENVI Series: VT-PTZ220N Close Button Click this button to exit EN-V-R Configurator program. 27.2. Searching for IP Devices Click the first button on the Main Toolbar. You are now given a choice to register the IP devices by “search and register or manually”. To make it easy, choose Search and register IP-Device in this stage, and click Next button.

  • Page 108: Registering Ip Devices

    ENVI Series: VT-PTZ220N The searching for IP devices is started. As the detected IP devices are being listed. Wait until searching is finished. If you click Cancel button in the middle of searching, the EN-V-R will retain only the IP devices found until that moment.
  • Page 109 ENVI Series: VT-PTZ220N The next window shows up and it’s for entering the network parameters and camera resolutions of the IP device you’ve chosen. You may need to enter the Login ID and Password here. Click Save to finish registering it.
  • Page 110 ENVI Series: VT-PTZ220N Click Apply after registering one or more IP devices (cameras).The image below represents the configurator with multiple IP devices registered. After clicking Apply, the program will ask you to confirm it.Then click OK...

  • Page 111: Viewing Live Video

    ENVI Series: VT-PTZ220N EN-V-R service is being stopped momentarily, and then it will start running again. 27.4. Viewing Live Video Once the network and cameras are set up, it is necessary to check if EN-V-R is functioning by viewing the live video from those devices.

  • Page 112: Recording Video

    ENVI Series: VT-PTZ220N In some cases there is no response from the web browser, you may need to install the ActiveX manually by clickingManualDownload. When you see the following security warning, click Install. 27.5. Recording Video The essential feature of EN-V-R is recording the video from IP devices.
  • Page 113 ENVI Series: VT-PTZ220N You are able to change the setting by highlighting the drive then clicking the first icon of the sub-menu Toolbar. Use HDD (to use this HDD for recording) Possible Maximum Quota (the available of free space on your HDD)
  • Page 114 ENVI Series: VT-PTZ220N Now you will see Configure Recording Condition window as below. The recording feature is already enabled and recording conditions are configured in default settings. In the example shown above, you can see that Camera 1 of Device 0 will record video only when motion is...
  • Page 115 Now that the configuration is done, you need to start the EN-V-R service program. Select Start > All Programs >Vitek>smart NVR>Smart NVR controller. You will find the EN-V-R icon on the system tray, which is located right, bottom part of the Windows...
  • Page 116 ENVI Series: VT-PTZ220N Move the cursor over the icon, and right click. The following pop-up menu will show. You can open EN-V- R Configurator or EN-V-R Controller program from this menu, or you can go to the Home page of the EN- V-R program for live view or playback.

  • Page 117: Envi Smart Player

    ENVI Series: VT-PTZ220N 28. ENVI Smart Player 28.1. Introduction Smart Player is and ActiveX program for Internet Explorer Web browser, which enables users to search and play back recorded video in Network Video Servers and other devices with built-in recording capabilities.

  • Page 118: Installing And Uninstalling

    Installing Smart Player Connect to the Vitek Camera / Server / NVR on Internet Explorer, and click Player on the main page. If you're using Windows XP Service Pack 2 or later, it may asked you to install ActiveX click the massage bar than click on the Install ActiveX control…...
  • Page 119 ENVI Series: VT-PTZ220N The following window will appear. Click Next. The following window will be displayed. Click Install After installation is successfully completed, the following window will be displayed. Click Finish.

  • Page 120: Uninstalling Smart Player

    Click Uninstall and the following window will be shown. Click the Yes button. Live View & Play Back To live view and play back your cameras, go to Start menu, All Programs, Vitek Folder, Click on Smart NVR Controller, as shown below.
  • Page 121 ENVI Series: VT-PTZ220N Look for icon on right side of taskbar as shown below (windows XP and windows 8 might show it different). Right click icon. The following window will display. Click on Open Smart NVR Controller. Click on Start Service to run the program.
  • Page 122 ENVI Series: VT-PTZ220N Click on Go Home to view Smart Player Home Page Click on Live View The following screen will be display were you can configure your live view. Server Control Bar Allows you to view cameras / servers that are registered in the system. Toggle On/Off...
  • Page 123 ENVI Series: VT-PTZ220N Group Control Bar In order to view video, cameras must be assigned to a group, in this section you create groups with cameras you want to view. Create Group In order to create a group in Group Control Bar, right click on Group, another window will appear then...
  • Page 124 ENVI Series: VT-PTZ220N The following window will be displayed. Type in the group name, check “Circulation” to allow sequencing, input dwell time for “Circulation” and click OK. A new group with the assigned name will be created as shown below.
  • Page 125 ENVI Series: VT-PTZ220N Audio Control Bar Controls Speaker and Mic volume. When audio is available click on Connect and adjust speaker and mic levels, when done click Disconnect. Full/Normal Screen Select full screen as seen below, to return to normal press Escon your keyboard.
  • Page 126 ENVI Series: VT-PTZ220N Group Circulation Start sequencing between groups.
  • Page 127 ENVI Series: VT-PTZ220N Layout settings You can change the screen layout between 1,2,4, etc. Image in Original Size This allows for digital zoom.
  • Page 128 ENVI Series: VT-PTZ220N Draw Image by Maintaining Aspect Ratio Maintains the aspect ratio of the camera Draw Image by Filling the Screen...
  • Page 129 ENVI Series: VT-PTZ220N Enhanced Draw Mode On/Off. Enhance image for a better reproduction.

  • Page 130: Configuring& Viewing Player

    ENVI Series: VT-PTZ220N About Smart Viewer You can see the status of the Smart Viewer 30. Configuring& Viewing Player From the Home Screen click on Player...

  • Page 131: Main Window View

    ENVI Series: VT-PTZ220N 30.1. Main Window View Note:The appearance of Smart Player window may vary depending on version and type of Vitek device you’re using. This user’s manual is based on general display screen. Server Control Allows you to view cameras / servers that are registered in the system.

  • Page 132: Connecting To Nvr Player

    ENVI Series: VT-PTZ220N You can compose a new group by dragging&dropping servers, modules, and Group Control cameras into a group.Grouping provides search function of recorded video from BarB cameras. Playback Control Users can use this bar for functions such as forward/reverse play, previous frame, next frame, pause, stop, playback speed.
  • Page 133 ENVI Series: VT-PTZ220N The following window will be displayed. Type in the group name and click OK. A new group with the assigned name will be created as shown below. To add a camera to the new group, drag and drop from the server tree to the newly created group.

  • Page 134: Searching Video

    ENVI Series: VT-PTZ220N 31. Searching Video Make sure you have recorded video on the calendar (recorded video shows in red). There are three choices in searching recorded video - Day Search, Condition Search, and Data Search. Make sure that Camera / Server Connection and Creating Group have been performed before you search recorded video.

  • Page 135: Search Mode

    ENVI Series: VT-PTZ220N 31.2.1. Search Mode By clicking a date in red on the calendar, the time frame recorded is shown. 31.2.2. GO to Time Position To go to specific time click on “Go to time position” than input time and click search.

  • Page 136: Advanced Search Mode

    ENVI Series: VT-PTZ220N video will start playing back right after searching is completed. 31.3.1. Advanced Search Mode In Advance Search Mode you can select which conditions to search from (Time, Event, etc) First, select Time checkbox, and choose the desired time frame (Start date and time ~ End date and time), and then click Add Condition button to add to Search Condition.

  • Page 137: Video Playback Controls

    ENVI Series: VT-PTZ220N Now that all the conditions have been configured, click Search button to start searching. Any video data which meets at least one of the conditions in Search Condition list will be shown as the results. 32. Video Playback Controls...

  • Page 138: Extra Features

    ENVI Series: VT-PTZ220N Back to Previous Frame Go to Next Frame Playback Speed Control Player Path Control (only for condition search mode) 33. Extra Features 33.1. Window Control Users canopen or close control windows. 33.2. Recording Period You can view the starting and ending date of a recorded channel.

  • Page 139: Backup

    33.3. Backup There are two backup formats IDX and AVI. .IDX Default video file format used by Vitek .AVI Video file format supported by Microsoft Windows When the Backup button is clicked, the following window is displayed as below. Check the camera to backup. For AVI backup, only one camera is Select Camera permitted.

  • Page 140: Snapshot

    ENVI Series: VT-PTZ220N After searching is finished, backup operation will start. When backup is completed, the following window will appear. Click OK button. Note: For AVI file backup, only one camera is allowed. For IDX backup, multiple cameras are allowed.

  • Page 141: Print

    ENVI Series: VT-PTZ220N The below picture is a result of snapshot from the above window. 33.5. Print Choose the camera currently being played or paused, then click Print button. Then the image of the selected camera will be sent to your default printer.
  • Page 142 ENVI Series: VT-PTZ220N...

  • Page 143: En-V-R Configuration

    ENVI Series: VT-PTZ220N 34. EN-V-R Configuration 34.1. System, Network Configuration General system and network properties of EN-V-R program can be set up in this section. To start, select System, Network Configuration from the menu list. Items Descriptions System Name Setting Enter the system's name.

  • Page 144: System, Network Configuration - Admin Password

    ENVI Series: VT-PTZ220N Items Descriptions System name Type in a System name. Click this button to apply the entered System Name. Cancel Click this button to discard the configured System name. 34.1.2. System, Network Configuration - Admin password To assign Password for the admin, click System, Network Configuration on the menu tree.

  • Page 145: System, Network Configuration - Http Port

    ENVI Series: VT-PTZ220N Items Descriptions Set Full Access for the user. Anyone can connect to the EN-V-R without Full Access authentication, and be allowed live view, audio, PTZ, playback. Set Limited Access for the user. Only the users with proper permission Limited Access to the camera can access it.

  • Page 146: Ip-Cctvdns Registration

    Items Descriptions Service Set to use IP CCT DNS or not. DNS Server IP Vitek IP CCTV DNS address already entered. Go Server Directs to Vitek IP CCTV DNS server MAC address of EN-V-R already entered Product Key Product Key of EN-V-R already entered Enter an external HTTP Port to use for IP CCTV DNS service.
  • Page 147 ENVI Series: VT-PTZ220N on the NEXT button as shown below. Fill out the requested information as shown below and click on Apply. The following screen will confirm that your Membership has been completed successfully, that click...
  • Page 148 ENVI Series: VT-PTZ220N You will be brought back to the main page of the IPCCTVDNS website; in this case you need to Login with the information previously created. To register your first product, click on Product Registrationas shown below. Enter the requested information (The name of your camera, the Mac Address and product Key) as shown below.
  • Page 149 ENVI Series: VT-PTZ220N A window will pop up confirming that your product has been registered successfully, click on OK. Product List You will be directed to the page where you will be able to see your recent camera registration. By clicking the Detail Information tab you will be allow edit DDNS Host Name...
  • Page 150 ENVI Series: VT-PTZ220N Type in desired host name than click Apply. A window will pop up asking if you really want to apply the new configurations, to continue click A window will pop up confirming that the product information has been modified successfully, click...
  • Page 151 ENVI Series: VT-PTZ220N Your camera with the new DDNS Host name will be displayed. Your camera is now registered and ready for use.

  • Page 152: Ip-Device Registration

    ENVI Series: VT-PTZ220N 36. IP-Device Registration You will see how to manage IP devices in this section, which includes registering, modifying, and deleting IP devices. To start managing IP devices, select IP-Device, Camera Management from the menu list. Items Descriptions IP-Device Manual Registration Register IP-Devices manually by users.
  • Page 153 ENVI Series: VT-PTZ220N Item Description IP-Device ID Select the IP-Device ID to register. Select the Vendor name of the IP-Device to register. Click the pull-down list, and choose a proper vendor name from the list. Vendor Select the total number of channels (streams) the IP device has. Click the Model pull-down list, and choose proper one from the list.

  • Page 154: Ip-Deviceregistration (Automatic)

    Check this box if the information from IP-Device needs to be acquired. from IP-Device Select the VS Module ID. Enter 0 for non-Vitek IP devices. Vitek products VS Module ID can be set to 0 to 15, and default is 0.
  • Page 155 ENVI Series: VT-PTZ220N Items Descriptions This list shows the IP devices found during the scan process. If you need IP-Device list to select multiple IP devices at the same time, drag your mouse over the devices or keep pressing CTRL or SHIFT key while clicking the IP devices.

  • Page 156: Ip-Devicemodification

    ENVI Series: VT-PTZ220N Items Descriptions Descriptions of the image resolution modes in the IP-Device Resolution Description list.(R1, R2, R3, R4, R5, R6, R7, R8, R9, R10) Descriptions of the PTZ numbers in the IP-Device list. PTZ Install Description (P1, P2, P3, P4) IP-Device list IP-Device list to select from.
  • Page 157 (not allowed to modify) Getting Information from (not allowed to modify) IP-Device Select the VS Module ID. Enter 0 for non-Vitek IP devices. Vitek VS Module ID products can be set to 0 to 15, and default is 0. HTTP Port Enter the HTTP Port to use with the IP-Device.

  • Page 158: Ip-Devicedeletion

    ENVI Series: VT-PTZ220N Cancel Click this button to discard the changed values. 36.3. IP-DeviceDeletion To delete a registered IP-Device, click IP-Device, Camera Management on the menu tree in the left pane. Then select an IP device to be deleted from the list. Click Remove IP-Device registration 36.4.

  • Page 159: Configure Camera Name And Information

    ENVI Series: VT-PTZ220N Camera Information Configure Information of the selected camera. Resolution and Quality Choose the resolution and quality of cameras. Recording Conditions Set up recording conditions. Alarm and Map service settings Configure Alarm and Map service functions. 36.5.1. Configure Camera Name and Information From the configuration list, select a camera to be assigned with a name.

  • Page 160: Camera Resolution, Quality

    ENVI Series: VT-PTZ220N The below image will be display, enter name (F), then click Apply to camera(H), then OK. Items Descriptions A,B,C,D Camera Selection Select one or more cameras for name assignment by clicking buttons. Unselect All Clear the device list which shows the selected cameras.

  • Page 161: Configure Camera Recording Condition

    ENVI Series: VT-PTZ220N Items Descriptions A,B,C,D Camera Selection Select one or more cameras by clicking buttons. Unselect All Clear the device list which shows the selected cameras. Resolution Select the video resolution. Quality Select the video quality. Apply to Camera Apply the selected video resolution and quality to the system.
  • Page 162 ENVI Series: VT-PTZ220N The below image is where you adjust the recording parameters. Item Description A,B,C,D Camera Selection Select one or more cameras by clicking buttons. Unselect All Clear the device list which shows the selected cameras. Condition List Define the condition for recording to be started.
  • Page 163 ENVI Series: VT-PTZ220N Pre Alarm Images Select pre-alarm images. Pre Alarm Speed Select pre-alarm speed. Post Alarm Images Select post-alarm images. Post Alarm Speed Select post-alarm speed Click this button to confirm the change and exit the window. Cancel Click this button to cancel the all the changed made in this session.

  • Page 164: Alarm, Event Configuration

    ENVI Series: VT-PTZ220N 36.5.4. Alarm, Event Configuration To configure the Alarm and Event features, select a camera to configure, and then click Configure alarm, map service Item Description...

  • Page 165: User Management

    ENVI Series: VT-PTZ220N A,B,C,D Camera Selection Select one or more cameras by clicking buttons. Unselect All Clear the device list which shows the selected cameras. Alarm Service Setup Put check marks on alarm types to use. Event Service Setup Put check marks on event types to use.

  • Page 166: User Registration

    ENVI Series: VT-PTZ220N 36.6.1. User Registration To register a new user, click the 1'st button on the tool bar in the sub-menu toolbar. Items Descriptions User ID Enter a new User ID to register. Password Enter the Password for the new user.

  • Page 167: Userdeletion

    ENVI Series: VT-PTZ220N To modify a user's information, select the users name than click the second button on the submenutoolbar. The User Registration window will come up on the screen, make the necessary changes and click OK . 36.6.3. UserDeletion To delete an existing user, select the user name than click Remove Registered user account, another screen will pop up confirming to proceed with deletion, click OK to proceed .

  • Page 168: Disk Mode Change

    ENVI Series: VT-PTZ220N device list. The following window will be displayed. Item Description Use HDD Decide whether this HDD is to be used. Possible Maximum Quota Display Possible maximum quota on this HDD. Possible Minimum Quota Display Possible minimum quota on this HDD.
  • Page 169 ENVI Series: VT-PTZ220N Items Descriptions Disk Circulation Setup Configure disk circulation type. Disk Usage Report Setup Configure email address for reporting. Click the Disk Circulation in the list. The following window will be displayed. Item Description Use circulation Select this if disk circulation will be used.

  • Page 170: Utilities

    ENVI Series: VT-PTZ220N Item Description Use to report HDD usage Choose whether to Enable or Disable the report service. When disk circulation is not used, select the HDD size when it will be Report HDD space reported by email. Periodic report Define when Periodic reports will be sent.

  • Page 171: About Program

    ENVI Series: VT-PTZ220N email account for mail service Item Description Service Decide whether to report HDD usage by email or not. SMTP server Enter the address of SMTP server for sending email. Authentication Decide whether to use Authentication. Email user id Enter the sender's id for email account.

  • Page 172: Using En-V-R Controller

    Click this button to close the Window. 37. Using EN-V-R Controller To open EN-V-R controller,click Start >All Programs>Vitek>SMART NVR Controller. Smart NRV controller will be on the lower right part of the system tray. Then right click the icon a sub- window will display, click on Open Smart NVR Controller.

  • Page 173: Connecting To En-V-R

    ENVI Series: VT-PTZ220N Items Descriptions Current Service State Shows whether EN-V-R Service is running or stopped. Start Service Click this button to start EN-V-R Service when it’s stopped. Stop Service Click this button to stop EN-V-R Service when it’s running.

  • Page 174: Pc Without En-V-R

    ENVI Series: VT-PTZ220N After you successfully connecting to the EN-V-R homepage, you will see the following window. Items Descriptions Home Go to EN-V-R’s homepage. Click this button to execute Live View program. You can use various Live View features such as live view, audio transmission, PTZ control, unconditional recording, etc.
  • Page 175 ENVI Series: VT-PTZ220N In case that the HTTP port for EN-V-R is not 80 (default), the port number should be entered  together with the IP address. (the example below assumes HTTP port of 7777)
  • Page 176 VOID in the event of alteration, defacement, or removal of serial numbers. Within the first 6 months of purchase, VITEK will replace or credit any defective product at the request of the customer (subject to availability) with a new product that equals or exceeds the performance of the original product purchased.
  • Page 177 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 28492 Constellation Road ValenCia, Ca 91355 WWW.ViteKCCtV.CoM | 888-ViteK-70 VeRsion 4 08/2013...

Table of Contents