Advertisement
2. Recommended Installation Position
2-1 Examples of correct camera installation
1. Decide the camera installation position.
2. Clean the camera installation surface.
3. Mount the camera on the license plate.
4. Fix the camera temporarily with screw.
5. Complete all of the required connections.
6. Display the camera video.
7. Change the shift lever to the R (Reverse) range to view the image of the rear of the
vehicle.
8. Adjust the camera angle so that the rear part of the vehicle or the rear bumper is
visible at the bottom of the monitor screen.
9. After adjusting the camera angle, tighten the retaining screws firmly.
10.Perform the operations in "Camera Setting".
11.Fix the camera firmly in position.
6
Installation position
2. Recommended Installation Position
2-2 Installing the Switch Unit
1. Clean the switch unit installation surface.
2. Attach velcro tape on the bottom of the switch unit and then attach it in an
easy-to-operate position, for example near the dashboard on the driver seat side.
7
Advertisement
