Call Alerts; Sending Call Alerts; Receiving A Call Alert - Motorola DTR410 User Manual

2-4

Call Alerts

Sending a call alert lets the recipient know you want to talk to him or her. When you send a call alert,
the recipient's radio emits a series of beeps, or vibrates, and displays your Unit Name or ID along
with the time and date.
The recipient can:
• Answer – begin a call by pressing the PTT button.
• Clear – delete the call alert.
• Voice Vibrate Call – the radio vibrates when a call is received after being idle for at least 30
seconds

Sending Call Alerts

NOTE: Only Private Contacts can be alerted.
1. Highlight the Private Name/ID in Contacts or Recent Calls..
2. Press
3. Press the PTT button until "Alert Successful" appears on the display.
NOTE: If the alert is not successful, the radio you are trying to reach is either in a call, on another
channel, has the radio turned off, or is out of range.

Receiving a Call Alert

When you receive a call alert, you must answer or clear it. You cannot make new calls until you do.
To answer a call alert, press the PTT button to respond to the sender. To clear a call alert, press
under Clear.
November 2008
Contacts
hipping
Maintenance
mith
Alert
under Alert. "Ready to Alert" appears on the display.
lert
Smith
9:46pm 11/18
General Radio Operations: Call Alerts
Back
Clear
9980384R89-E