Motorola DTR410 User Manual page 68

6-4
7. Press
8. Scroll to the contact to receive the new contact.
9. Press
10. Press
these are correct press
are not correct press
NOTE: When selecting contacts to OTA clone from the contacts, there is an option to select
11. The screen displays the message "Clone Sending XXXXXXX". X = the contact you are send-
ing to. If sending a contact to a PrivateGroup, the display shows each target radio individually.
If cloning was successful, both the source and targets radios indicated "Programming Successful". If
over-the-cloning to a PrivateGroup fails, the radio displays the failed clone list. The user can attempt
cloning again to any members of this list.
For more information on DTR products, visit the following website at: <http://www.motorola.com/
DTR/>.
November 2008
under Change.
Contacts
oe Smith
Receiving
Security
Select
under Select to select the contact.
Send Contact
dd:Joe Smith
To:Security
Change
under Prgm. The screen is displayed showing the Add: and To: selections. If
under Go to transmit the selection over the air. If the selections
under Back to return to the selection menu
All. This allows the user to either clone all contacts from one radio to another or to
clone to all contacts.
ress Go To
Add:Joe Smith
To:Security
Over The Air
Go
Cloning Mode: Adding/Deleting a Contact
Back
Prgm
Back
9980384R89-E