Install The Battery; Charge The Battery - Motorola DTR410 User Manual

GETTING STARTED

1. INSTALL THE BATTERY

Slide the lock tab to the left to unlock and push down on the
latch at the top of the battery door and lift off the radio. Insert
the battery, printed arrows first, into the battery compartment
and press down to secure in place. Replace the battery door.

2. CHARGE THE BATTERY

Connect the charger to the drop-in charging tray and insert
the radio using the plug of the plug in charger. The battery
meter on the radio display will stop flashing when fully
charged.
3. TURN THE RADIO ON
Press the Power Button (hold to turn off).The radio chirps.
NOTE:Batteries are shipped uncharged from the factory. Always charge a new
battery to capacity before initial use, charge time is dependent upon
charger type.
SENDING A VOICE CALL
1. Turn the radio on and select the recipient(s) by either:
• Selecting from the scroll list, using the navigation keys
• Selecting from Contacts by pressing Menu and using the navigation keys
• Selecting from Recent Calls by pressing Menu then selecting Recent Calls
2. Press and hold the PTT button on the side of the radio
until the talk permit tone is received, then speak clearly
into the microphone. If "User Not Available" displays, the
recipient is either in another radio call, out of range, or
turned off. Try to connect again. When making a group
call, at least one member of the group must be available.
3. Release the PTT button to listen.
RECEIVING A VOICE CALL
1. Turn radio on and set volume level.
2. Switch to desired Public Group using the navigation keys
3. When a Private, private Group, or Group call is received, it will be heard at
the volume level you have set. Press the PTT to respond.
MOTOROLA, the Sylized M Logo, are registered in the
U.S. Patent and Trademark Office. All other product or
service names are the property of their respective
owners.
©Motorola, Inc. 2008. All rights reserved.
Printed in U.S.A.
*5480384S84*
5480384S84-B
MAN WITH RADIO