Setting The Volume - Motorola DTR410 User Manual

General Radio Operations: Settings
7. After completing the time setting press
return to the previous menu.

Setting the Volume

The functions of the various selections are as follows:
• Ringer: volume level for all data status alerts such as Alert Tones and incoming SMS
Messages. Turning VibraCall on changes this level to 0.
• Speaker: volume level for voice messages.
• Keypad: volume level for keypad presses.
• Alarm: volume level for the Alarm feature, which is overridden by VibraCall.
NOTE: Ambient Noise only increase and decrease the mic sensitivity.Alarm:
• Talk Permit Tone (TPT) Offset Volume: volume level setting.
NOTE: For TPT Offset, the volume can only be changed by highlighting TPT Offset and
From the Settings menu, scroll to highlight Volume and press
menu appears.
NOTE: Highlighting any of the volume choices and pressing the Volume Control keys automatically
adjusts the volume levels.
NOTE: Pressing the Volume Control keys while not in the Volume menu only sets the Speaker
Volume.
Setting the Ringer Volume
1. From the Volume menu, scroll to highlight Ringer and press
Ringer screen appears.
NOTE: The procedure for Ringer is same as for the rest of the volume expect TPT. The Up
9980384R89-E
then pressing the Volume Control keys.
Volume
inger:6
Speaker:7
Keypad:1
Change
and Down button has to be used for volume changing.
Ringer
K
under Done to complete the setting and to
under Select. The Volume
Back
3
Cancel
2-17
under Change. The
November 2008