Security; Security Settings; Phone And Sim Card Security - Vertu CONSTELLATION QUEST RM-582V Reference Manual

Security

Your Vertu phone has a number of security features that help to prevent:
• Unauthorised use of your Vertu phone when your SIM card is inserted.
• Unauthorised use of your Vertu phone if a different SIM card is inserted.
• Unauthorised use of your SIM card in another phone.

Security Settings

Security functions are contained within the Security module in the phone, where
security is set up for four separate aspects.
Select Menu > Ctrl. Panel > Settings > General > Security.
Adjusts the security settings for your device and SIM card.
Phone and SIM
See "Phone and SIM card security" on page 34
card
Manages your security certificates
Certificate
See "Certificate manager" on page 36
management
Protected content Adjusts your settings for DRM protected content
See "Protected content Digital Rights Management (DRM)"
on page 37
Manages your security module
Security module
See "View and edit security modules" on page 38
Avoid using codes that are similar to emergency numbers to prevent accidental
dialling of the emergency number.
Codes are shown as asterisks. When you change a code, enter the current code,
then the new code twice.

Phone and SIM card security

PIN code
The PIN code protects your device from unauthorised use. The PIN code is supplied
with the SIM card.
When the PIN code security feature is active, you need to enter the PIN code each
time you switch on your Vertu phone. If you previously used your SIM card in another
phone, the code will be the same.
IMPORTANT: The SIM card will be blocked if you enter an incorrect PIN
code three times in succession.
If this happens, you will need to contact your service provider to obtain the
PUK (PIN Unblocking Key), and enter this on your phone.
The PUK cannot be changed. If you enter an incorrect PUK 10 times in
succession, your SIM card will be permanently blocked.
NOTE: The default setting for the PIN code security feature is defined by
your service provider. Some service providers do not allow you to disable
the PIN code request.
PIN code request
To activate or deactivate the PIN code security feature:
1. From the Home screen, select Menu > Ctrl. Panel > Settings > General >
Security > Phone and SIM card > PIN code request.
2. Select On to enable the PIN code request, or Off to disable it.
3. Enter the PIN code (which must be 4 to 8 digits long), then select OK. A
confirmation message is displayed.
To change the PIN code
NOTE: To change the PIN code, the PIN code request must be set to On.
1. From the Home screen, select Menu > Ctrl. Panel > Settings > General >
Security > Phone and SIM card > PIN code.
2. Press the Middle select, and when prompted, enter the current PIN code, then
select OK.
3. When prompted, enter the new PIN code, then select OK.
4. Enter the new PIN code again for verification, then select OK. A confirmation
message is displayed.
Security
34