Table of Contents
Advertisement
Map view
1. Selected location
2. Indicator area
3. Point of interest (for example, a railway station or a museum)
4. Information area
Change the look of the map
View the map in different modes, to easily identify where you are
1. Select Menu > Maps and My position.
2. Press 1, and select from the following:
In the standard map view, details such as location names or
Maps
motorway numbers, are easy to read.
For a detailed view, use satellite images.
Satellite
View at a glance the ground type, for example, when you are
Terrain
travelling off-road.
3. To change between 2D and 3D views press 3.
Download and update maps
Normally maps are pre-loaded on the SD card (F: drive). However, if you need to
download or update maps, the procedure is as follows:
• To avoid mobile data transfer costs, download the latest maps and voice guidance
files to your computer using the Ovi Suite application, and then transfer and save
them to your phone.
• To download and install Ovi Suite on your compatible computer, either go to
www.ovi.com or install it from the SD card supplied with your phone. Refer to
"Install Ovi Suite" on page 93 for further help.
• To make sure your device does not use an internet connection, in the main menu,
select Options > Settings > Internet > Connection > Offline.
TIP: Save new maps to your device before a journey, so you can browse the
maps without an internet connection when travelling abroad.
Using the compass
Your Vertu phone contains a compass. When activated, both the arrow of the
compass and the map rotate automatically in the direction to which the top of your
phone is pointing.
Select Menu > Maps and My position.
Press 5
Activate the compass. The map is oriented north.
Press 5
Deactivate the compass.
The compass is active when there is a green outline. If the compass needs
calibration, the outline of the compass is red or yellow. Note that the function of the
Maps
:
120
Advertisement
Table of Contents
