Camera Setup - Vertu CONSTELLATION QUEST RM-582V Reference Manual

Image Mode Description
Ideal to capture images in low light without flash
Night
Ideal to capture portraits in low light with flash
Night
portrait
When the camera is in video mode the options present for the scene mode are
Automatic and Night.
Flash setting
1. Highlight the flash icon from the toolbar, and then press the Middle Select
key.
2. Select the relevant option, and the appropriate icon displays in the toolbar.
Options include Automatic, On, Reduce red eye, and Off.
3. This option is retained until a change is made.
Self timer
To take a photo using the self-timer:
1. With the Camera in image mode, select the Self-timer option
toolbar.
2. You get a list of options to chose from: Off, 2 seconds, 10 seconds, and 20
seconds. Select the relevant option and press OK.
When you are ready to take the photo, press Activate and an audible countdown
starts and the image is captured.
Sequence mode
This enables you to capture several images in a sequence, if enough memory is
available.
Use the Left Select key or Right Select key to display the toolbar and select the
Sequence mode
A number of options are available, ranging from single shot to a user determined
sequence. The sequence setting captures 6 shots or if the key is held down, shots
are taken continuously until the memory available runs out.
Alternatively, select a specified time interval ranging from every 10 seconds to every
30 minutes, which will take images continuously until the memory runs out.
• Press Cancel to stop the capture process.
• The image is displayed along with a toolbar that appears on the right displaying a
list of options that can be done to work on the captured images.
• Select the Options button to delete the image, delete the sequence or go to the
Gallery where all the images are present.
• To deactivate sequence mode, select Sequence mode > Single shot in the
toolbar.
from the

Camera setup

A number of parameters can be set for taking still images or video clips, which are
determined from the context sensitive Options > Settings. The settings vary for
images and video.
Image settings
To modify still image settings, select the image mode, select Options > Settings and
from the following:
Settings
Image quality
Add to Album
Show captured
image
Default image
name
from the options and then press the Middle Select key.
Description
Set the image quality. The better the image quality, the more
memory the image consumes. Displays the image size for each
resolution.
Define the album to which the recorded videos are saved.
To see the image after the capture, select Yes. To continue
capturing images immediately, select Off.
Define the default name for the captured images.
Camera
84