Table of Contents
Advertisement
Video sharing
Use video sharing (network service) to send live video or a video clip from your
mobile device to another compatible mobile device during a voice call.
The loudspeaker is active when you activate video sharing.
If you do not want to use the loudspeaker for the voice call while you share video, you
can also use a compatible headset.
WARNING: Continuous exposure to high volume may damage your
hearing. Listen to music at a moderate level, and do not hold the device
near your ear when the loudspeaker is in use.
Video sharing requirements
Video sharing requires a UMTS connection. For more information on the service,
UMTS network availability, and fees associated with using this service, contact your
service provider.
To use video sharing you must do the following:
• Ensure that your device is set up for person-to-person connections.
• Ensure you have an active UMTS connection and are within UMTS network
coverage. If you move outside the UMTS network during a video sharing session,
the sharing stops while your voice call continues.
• Ensure that both the sender and recipient are registered to the UMTS network. If
you invite someone to a sharing session and the recipient's device is not within
UMTS network coverage, does not have video sharing installed, or person-to-
person connections set up, the recipient does not receive invitations. You receive
an error message that indicates that the recipient cannot accept the invitation.
Video sharing settings
To adjust video sharing settings, select Menu
Connection > Video sharing.
To set up video sharing, you need person-to-person and UMTS connection settings.
Settings and
>
>
Ctrl. panel
Person-to-person connection settings
A person-to-person connection is also known as a session initiation protocol (SIP)
connection. The SIP profile settings must be configured in your device before you can
use video sharing. Contact your service provider for the SIP profile settings, and save
them to your device. Your service provider may send you the settings or give you a
list of the needed parameters.
To add a SIP address to a contact:
1. Select Menu > Contacts.
2. Select the contact, or create a new contact.
3. Select Options > Edit.
4. Select Options > Add detaill > Share video.
5. Enter the SIP address in the format username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the contact, you can use the phone
number of the recipient, including the country code, to share video (if supported
by the network service provider).
UMTS connection settings
To set up your UMTS connection:
• Contact your service provider to establish an agreement for you to use the UMTS
network.
• Ensure that the UMTS access point connection settings for your device are
configured properly. For more information about the settings, contact your service
provider.
Share live video or video clips
During an active voice call, select Options > Share video.
1. To share live video during the call, select Live video.
To share a video clip, select Video clip and the clip you want to share.
You may need to convert the video clip into a suitable format to be able to share
it. If your device notifies you that the video clip must be converted, select OK.
Your device must have a video editor for the conversion to work.
2. If the recipient has several SIP addresses or phone numbers including the
country code saved in the contacts list, select the desired address or number. If
the SIP address or phone number of the recipient is not available, enter the
address or number of the recipient including the country code, and select OK to
send the invitation. Your device sends the invitation to the SIP address.
Call functions and Call Log
50
Advertisement
Table of Contents
