Vertu CONSTELLATION QUEST RM-582V Reference Manual page 35

PIN2 code
The PIN2 code is used to protect the advanced user functions of your SIM card, for
example, fixed dialling. The PIN2 code must not be the same as the PIN code.
NOTE: The PIN2 code is supplied with some SIM cards. For more
information, contact your service provider.
To change the PIN2 code:
1. From the Home screen, select Menu > Ctrl. Panel > Settings > General >
Security > Phone and SIM card > PIN2 code
2. Press the Middle select, and when prompted, enter the current PIN2 code, then
select OK.
3. When prompted, enter the new PIN2 code, then select OK.
4. Enter the new PIN2 code again for verification, then select OK. A confirmation
message is displayed.
IMPORTANT: The PIN2 protected features of your SIM card will be blocked
if you incorrectly enter your PIN2 code a number of times, normally after
three consecutive attempts.
If this happens, you will need to contact your service provider to obtain the
PUK2 (PIN2 Unblocking Key). Enter this on your phone to unblock the PIN2
code and restore your SIM card's full functionality.
Keypad autolock period
This function enables you to set the keypad to lock automatically after a defined
period.
1. From the Home screen, select Menu > Ctrl. Panel > Settings > General >
Security > Phone and SIM card > Keypad autolock period.
2. Press the Middle select and either enter a time in minutes for the autolock period,
or select None if you do not want to use this feature.
Phone autolock period
To set a time-out after which the device is automatically locked and can be used only
if the correct Lock code is entered. When the device is locked, you can still answer
incoming calls, and calls may still be possible to the official emergency number
programmed into your device.
1. From the Home screen, select Menu > Ctrl. Panel > Settings > General >
Security > Phone and SIM card > Phone autolock period.
2. Press the Middle select key and enter a number for the time-out in minutes, or
select None to if you do not want to use this feature.
3. Enter the Lock code when prompted.
Lock code
The lock code is used to unlock the device. To avoid unauthorised use of your device,
change the lock code.
To set a new lock code for the phone autolock function:
1. From the Home screen, select Menu > Ctrl. Panel > Settings > General >
Security > Phone and SIM card > Lock code.
2. The preset Lock code is 12345. Enter the current code and then the new code
twice. The new code can be 4 - 255 characters long. Both alphabets and digits
can be used, and both uppercase and lowercase alphabets are possible.
3. The device notifies you if the Lock code is not properly formatted.
Lock if SIM card changed
To lock the phone if you change your SIM card, select Menu > Ctrl. Panel > Settings
> General > Security > Phone and SIM card > Lock if SIM card changed.
To prevent the use of your device with an unauthorised SIM card, select Change >
Yes. The device now asks for the Lock code every time a new SIM card is inserted.
Remote phone locking
To lock your phone though your phone is not with you, select Menu > Ctrl. Panel >
Settings > General > Security > Phone and SIM card > Remote phone locking.
To enable locking of your phone with a text message, if your phone is lost or stolen
select Enabled. Write the locking message. You may need to enter the Lock code
to change this setting. To use a remotely locked device again, enter the Lock code.
Security
35