Table of Contents
Advertisement
BEFORE USING THE COOKER
RATING PLATE
Record the model, serial and product numbers
of your cooker on the back page of this
instruction book for future reference. You can
find these numbers on the rating plate on the
front frame of the cooker upon opening the top
oven door.
The cooker must be protected by a suitably
rated fuse or circuit breaker. The rating of the
cooker is given on the rating plate.
CONNECTING TO THE
ELECTRICITY SUPPLY
This cooker must be earthed and
protected by a 3 amp fuse.
The plug supplied with the oven can be fitted
directly to a suitable three pin earthed socket.
If you have to change the fuse replace it with a
3 amp fuse which has been ASTA approved to
BS 1362.
Do not use the plug until you have put the fuse
cover back on. If you cut the plug off dispose of
it safely as it will be a shock hazard if it is
inserted into a 13 amp socket elsewhere in the
house.
If the ignition system doesn't work there may be
a fault with the electrical supply. First, check the
socket by trying out another piece of electrical
equipment in it, if that works correctly renew the
fuse in the plug.
If the fuse keeps failing there is a fault in the
oven which must be put right. Do not use a fuse
with a rating higher than 3 amps. Do not carry
out other electrical work. Unplug the oven and
tell your installer.
WHEN FIRST SWITCHING ON
The timer must be set to manual operation
before the main oven can be operated. This
must be done whenever the cooker is switched
off at the wall or when there has been a power
failure. For instructions on how to set the timer
see page 11.
The Top Oven and the Grill are not controlled
by the electronic timer.
8
Advertisement
Table of Contents
