Driver Installation - Mac - Numark OMNI CONTROL Quick Start Manual

DRIVER INSTALLATION – MAC
Before you can begin using the OMNI CONTROL with your computer, you must install the necessary
drivers onto your computer. The installation is quick and easy – please follow the instructions below:
1. Please insert the included installation disc into your computer's CD-ROM drive.
CONNECT THE OMNI CONTROL YET!
2. Open the CD to view its contents.
3. Please double-click Install OMNI CONTROL to begin the installation procedure.
YOUR OMNI CONTROL IS NOW READY TO USE!
4. You will see the screen on the left appear. Click
Continue.
5. Select your hard-drive as a destination for the
driver installation and click Continue.
6. Click on Install to begin the installation.
7. Enter your password and click OK.
8. You will see the warning displayed on the left.
Please select Continue Installation.
9. Click Restart to restart your computer and
complete the installation. Once your computer
has restarted, please plug in the OMNI
CONTROL.
5
DO NOT