Last, any amplifiers, televisions, monitors, projectors, etc. 10. When turning off, always reverse this operation by powering down in the following order: • Any amplifiers, televisions, monitors, projectors, etc. • Your mixer. • Last, audio input sources. 11. Go to www.numark.com for product registration.
Power Jack and Power Switch: Always use the included power adapter with your product. USB 2.0 Connection to iPOD: This connection is used to access information on the respective iPod. The iDJ does not need to be powered on to use the USB 2.0 connection. See computer data connection diagram below.
To adjust, gently pull up on the adapter to slide out. You will notice two groves (positions) inside the iDJ docking well. For example, when using an iPod Mini, the adapter should be in the forward groove and use the rear position for larger capacity iPods.
Front Panel Overview MIC Input: ¼” microphone input. MIC GAIN: This knob controls the level of the microphone into the mixer. MIC TONE: This knob controls the tone of the microphone. Use this control to improve sound quality and to eliminate feedback. FADERSTART: In the ON position, the crossfader activates the PLAY and PAUSE function between one or two iPods (the iPod(s) must be connected via the docking connector).
Apple’s website. What is that round hole on the bottom of my iDJ for? The round hole on the bottom of the iDJ is used to place the unit on a turntable platter which has a spindle.
Need help?
Do you have a question about the iDJ and is the answer not in the manual?
Questions and answers