Related Manuals for Numark OMNI Control
Summary of Contents for Numark OMNI Control
- Page 1 QUICKSTART MANUAL ENGLISH ( 3 – 10 ) MANUALE DE INICIO RÁPIDO ESPAÑOL ( 11 – 18 ) GUIDE D'UTILISATION SIMPLIFIÉ FRANÇAIS ( 19 – 26 ) GUIDA RAPIDA ITALIANO ( 27 – 34 ) KURZANLEITUNG DEUTSCH ( 35 – 42 )
-
Page 3: Box Contents
Omni Control may not necessarily show up as “Omni Control” in the MIDI preferences. Please Note: If you are using Omni Control with a USB hub, we recommend that you either use a powered hub, or the optional 6V 1A power adapter. This will ensure proper operation. -
Page 4: Driver Installation - Pc
DRIVER INSTALLATION – PC Before you can begin using the OMNI CONTROL with your computer, you must install the necessary drivers onto your computer. The installation is quick and easy – please follow the instructions below: Please insert the included installation disc into your computer’s CD-ROM drive. -
Page 5: Driver Installation - Mac
DRIVER INSTALLATION – MAC Before you can begin using the OMNI CONTROL with your computer, you must install the necessary drivers onto your computer. The installation is quick and easy – please follow the instructions below: Please insert the included installation disc into your computer’s CD-ROM drive. -
Page 6: Connection Diagram
(Optional) You can power the OMNI CONTROL by connecting an optional 6V 1A power adapter to the DC IN input on the OMNI CONTROL. Please note that it is not necessary to have the adapter plugged in for the OMNI CONTROL to work. -
Page 7: Routing Audio Outputs In Traktor
ROUTING AUDIO OUTPUTS IN TRAKTOR If you are using the OMNI CONTROL with Native Instruments’ Traktor or Traktor LE software applications, please see the example and instructions below for information on routing your audio outputs to take full advantage of cueing and monitoring. -
Page 8: Changing Latency
(‘49’, ‘64’, ‘128’ samples), you may experience audio drop-outs and glitches. If you experience drop-outs or glitches, you will need to increase the audio latency in the Numark USB Control Panel by choosing one of the higher settings, such as ‘512’ or ‘1024’ samples. -
Page 9: Traktor Le Controller Mapping
TRAKTOR LE CONTROLLER MAPPING TRACK – You can use the TRACK knob to VOLUME – Adjusts the volume of the scroll through the music on your computer. corresponding deck. Press down on the TRACK knob to preview CROSSFADER – Fades between the the selected track. - Page 10 PH MIX – Adjusts the balance between the PAR – Adjusts the amount of the Monitor and Master channels in the designated Effect Parameter. Please headphones. Please note that, unless you note that this parameter will vary are using a multiple output audio interface, depending on the selected effect.
-
Page 11: Technical Specifications
TECHNICAL SPECIFICATIONS OUTPUTS: + 2dBU SIGNAL-TO-NOISE RATIO: > 97dB (max output; JIS-A Weighted) DISTORTION: < 0.005% (THD + N) FREQUENCY RESPONSE: ± 1dB (20Hz – 20kHz) WEIGHT: 7 lbs. DIMENSIONS: 12.5 x 10 5/8 x 2.5 ” ” ” (W x D x H) MANUAL VERSION 1.4... - Page 12 www.numark.com...
Need help?
Do you have a question about the OMNI Control and is the answer not in the manual?
Questions and answers