Driver Installation - Pc - Numark OMNI CONTROL Quick Start Manual

DRIVER INSTALLATION – PC
Before you can begin using the OMNI CONTROL with your computer, you must install the necessary
drivers onto your computer. The installation is quick and easy – please follow the instructions below:
1. Please insert the included installation disc into your computer's CD-ROM drive.
CONNECT THE OMNI CONTROL YET!
2. Double-click on Setup.exe.
YOUR OMNI CONTROL IS NOW READY TO USE!
3. Select your preferred language.
4. Click on Install the driver.
5. Read the User Agreement, select I accept the
agreement, then click Install.
6. The installation procedure will begin. Please
follow the on-screen instructions.
7. Once the installation has completed, you will
see the screen on the left. Click Reboot Now
or Reboot Later.
4
DO NOT