Lenovo ThinkStation E32 User Manual page 88

4. Press the release tab
Figure 79. Pivoting the drive bay assembly upward
5. Disconnect the front audio and USB assembly cables from the system board and note the cables
routing. See "Locating parts on the system board" on page 12.
6. Remove the screw that secures the front audio and USB assembly bracket. Then remove the front
audio and USB assembly bracket from the chassis.
Figure 80. Removing the front audio and USB assembly
7. Remove the two screws that secure the front audio and USB assembly to its bracket. Then remove the
failing front audio and USB assembly from the bracket.
8. Install a new front audio and USB assembly into the bracket and install the two screws to secure the
front audio and USB assembly to the bracket.
9. Install the front audio and USB assembly bracket to the chassis and align the screw hole in the bracket
with the corresponding hole in the chassis.
10. Install the screw to secure the front audio and USB assembly bracket to the chassis.
76
ThinkStation E32 User Guide
1 as shown and pivot the drive bay assembly upward.