7. Align the new internal speaker with the four metal clips
speaker to the right until it snaps into position.
Figure 78. Installing the internal speaker
8. Connect the internal speaker cable to the internal speaker connector on the system board. See
"Locating parts on the system board" on page 12.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 93.
Replacing the front audio and USB assembly
Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to replace the front audio and USB assembly.
To replace the front audio and USB assembly, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 32.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 32.
1
on the inner side of chassis, and then slide the
.
Chapter 5
Installing or replacing hardware
75