Replacing The Keyboard Or Mouse - Lenovo ThinkStation E32 User Manual

Machine types: 30a2 and 30a3
Hide thumbs Also See for ThinkStation E32:
Table of Contents

Advertisement

5. Disconnect the front antenna cable from the Wi-Fi card module.
6. Remove the front antenna and cable from the front of the computer.
Figure 103. Removing the front Wi-Fi antenna
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 93.

Replacing the keyboard or mouse

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to replace the keyboard or mouse.
To replace the keyboard or mouse, do the following:
1. Disconnect the old keyboard cable or mouse cable from the computer.
2. Connect a new keyboard or mouse to one of the USB connectors on the computer. Depending on where
you want to connect the new keyboard or mouse, see "Locating connectors, controls, and indicators on
the front of your computer" on page 8 or "Locating connectors on the rear of your computer" on page 9.
Figure 104. Connecting the USB keyboard or mouse
92
ThinkStation E32 User Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkstation e32 30a2Thinkstation e32 30a3

Table of Contents