Lenovo ThinkStation E32 User Manual page 67

6. Align the four holes in the secondary hard disk drive bracket with the corresponding four tabs on the
bottom of the primary hard disk drive bay as shown. Then, position the bracket onto the bottom of the
primary hard disk drive bay so that the tabs on the bay pass through the holes in the bracket.
Figure 47. Positioning the bracket onto the bottom of the primary hard disk drive bay
7. Slide the secondary hard disk drive bracket to the left of the chassis until it snaps into position and the
screw hole 1 in the bracket is aligned with the screw hole in the bay
Figure 48. Installing the secondary hard disk drive bracket
2 .
.
Chapter 5 Installing or replacing hardware
55