Stop Faxing; Setting Scanner Glass Size For Faxing; Colour Fax Transmission - Brother MFC-J470DW Basic User's Manual

e
Press Mono Start or Colour Start.
Faxing from the ADF
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass
 If you pressed Mono Start, the
machine starts scanning the first
page. Go to step f.
 If you pressed Colour Start, the
LCD asks if you want to send a
colour fax. Press 1 to choose
Colour fax to confirm. The
machine starts scanning and
sending the document.
f
When the LCD asks you Next Page?,
do one of the following:
 To send a single page, press 2 to
choose No(Send) (or press
Mono Start again).
The machine starts sending the
document.
 To send more than one page, press
1 to choose Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
h
After all the pages have been scanned,
press 2 or Mono Start to start sending.

Stop faxing

To stop faxing, press Stop/Exit.
Setting scanner glass size for
faxing
4
When documents are Letter size, you need to
set the Scan Size to Letter. If you do not, the
side portion of the faxes will be missing.
a
Load your document.
4
b
Press
c
Press a or b to choose
Advanced Settings.
Press OK.
d
Press a or b to choose
Glass ScanSize.
Press OK.
e
Press a or b to choose A4 or Letter.
Press OK, and then press Clear.
f
Enter the fax number.
g
Press Mono Start or Colour Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User's Guide: Setting
your changes as a new default.)
• This setting is only available for sending
documents from the scanner glass.

Colour fax transmission

Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the
machine's memory. When you send a colour
4
fax, the machine will send it in real time (even
if Real Time TX is set to Off).
Sending a fax
(FAX).
4
4
4
25