Packing And Shipping The Machine - Brother FAX-2840 Advanced User's Manual

Packing and shipping
the machine
Note
• If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
• If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, the toner
cartridge, and printed materials to use with
your 'Exchange' machine.
a
Turn off the machine's power switch.
Disconnect all the cables, and then
unplug the power cord from the AC
power outlet and remove the ADF
Document Output Support. Leave the
machine turned off for at least 10
minutes to cool down.
b
Open the front cover.
c
Remove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
42
d
Put the protective material (1) in the
machine with the "REMOVE" text to the
left, as shown in the illustration.
A
e
If you are not returning the machine as
part of an Exchange Service, put the
drum unit and toner cartridge assembly
back into the machine.
f
Put the elastic band over the handle of
the drum unit, as shown in the
illustration.