Receiving Faxes In Continue Mode; Toner End In Continue Mode; Lcd Contrast - Brother FAX-2840 Advanced User's Manual

Chapter 1
Receiving faxes in Continue
Mode
The machine can store received faxes in the
memory if you choose Continue mode when
the LCD shows Replace Toner. When
received faxes are printed in Continue mode
the LCD will ask if the print quality of the fax
is OK. If the quality is not good, choose
2.No. The machine will keep the faxes
stored in the memory so you can reprint them
after you replace the toner cartridge with a
new one. If the print quality is good, choose
1.Yes. The LCD will ask if you want to
delete the printed faxes from the memory. If
you choose not to delete them, you will be
asked again after you replace the toner
cartridge with a new one.
Note
• The FAX-2840 and MFC-7240 can store
up to 400 faxes in memory and the FAX-
2950 and MFC-7290 can store up to 500
faxes in memory.
• (FAX-2840 and MFC-7240)
If you turn off the power switch faxes
stored in memory will be lost.
• The machine will keep faxes stored in
Continue Mode even if you change the
Continue setting to Stop.
• If you install a new toner cartridge when
the LCD shows Toner Ended, the
machine will ask if you want to print the
stored faxes. Choose 1.Print to print
stored faxes.

Toner End in Continue Mode

When the LCD shows Toner Ended the
machine will stop printing. If the memory is full
and you want to continue receiving faxes, you
must install a new toner cartridge.
4

LCD Contrast

1
You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu, 1, 5.
b
Press c to make the LCD darker. Or,
press d to make the LCD lighter.
Press OK.
c
Press Stop/Exit.
1
1