Advertisement
Reassemble handle back on the mower. Install the
Attach both springs to the clutch arm and cable
hairpin clips. Fig. 83.
mounting bracket. Fig. 86.
Fig. 83
Place the "0" ring retainer cup on the square shift
fork shaft. The open side must be facing up. Fig. 84.
Fig. 84
Fig. 86
Slide the clutch arm onto the shift fork shaft and
press it into place. It will require effort to push it
down due to the resistance of the "0" ring. Fig. 87.
Fig. 87
Assemble the "0" ring onto the hub of the clutch
arm. Fig. 85.
Fig. 85
SERVICE BULLETIN REFERENCES....
20.21
OCTOBER 1984
Advertisement
